Author Topic: Metal clip dangling from clutch and choke cables  (Read 2306 times)

Offline yuckhil

  • TURBO TYPER!
  • **
  • Posts: 32
Metal clip dangling from clutch and choke cables
« on: October 11, 2008, 07:26:03 AM »
A metal clip that looks like a little 2" coat hanger is dangling from the clutch and choke cables.  Where should it hook onto?  Thanks.

See image
« Last Edit: October 12, 2008, 02:08:13 AM by yuckhil »
2000 GSF250VY

Offline tomacGTi

  • Board Homesteader!
  • ***
  • Posts: 663
Re: Metal clip dangling from clutch and choke cables
« Reply #1 on: October 11, 2008, 10:42:51 AM »
Guide loop for the cables.

Should have another end with a loop in it that screws to the bottom of the triple somewhere. Good chance that it broke off.

Offline yuckhil

  • TURBO TYPER!
  • **
  • Posts: 32
Re: Metal clip dangling from clutch and choke cables
« Reply #2 on: October 12, 2008, 02:13:08 AM »
Good call.  The only options that I see are a screw on either side of the steering lock.  Would you please have a look whether that is what I should hook it on to?  I cannot seem to orient the cable guide against the screw without bending it.  Thank you.
2000 GSF250VY

Offline Banditmax

  • Board Homesteader!
  • ***
  • Posts: 519
Re: Metal clip dangling from clutch and choke cables
« Reply #3 on: October 12, 2008, 07:23:48 PM »
pretty sure theyre meant to go on the same bolts as the ignition switch.

Offline yuckhil

  • TURBO TYPER!
  • **
  • Posts: 32
Re: Metal clip dangling from clutch and choke cables
« Reply #4 on: October 13, 2008, 05:51:57 AM »
Ok, thanks.  I'll try again.
2000 GSF250VY