Author Topic: My hump.  (Read 6207 times)

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
My hump.
« on: June 10, 2007, 07:57:59 PM »
Thanks to Krautwagen -- I've eliminated my fender and put on smaller indicators. Dave did all the hard work, all I did was bolt it on.

Before


After
« Last Edit: August 29, 2010, 08:08:36 PM by interfuse »
Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline PitterB4

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 3698
My hump.
« Reply #1 on: June 10, 2007, 09:11:10 PM »
Lookin' good Mike!   :clap:   I've always thought those big ole stock signals looked out of place on the B4.  Nicely done.
Rob
Bikeless!
'93 Bandit 400 - SOLD
'98 Honda F3 Track Bike - SOLD
'98 Kawi ZX-6R Street Bike - SOLD
NESBA #87 - RETIRED
'00 Gary Fisher Kaitai
'09 Bianchi Via Nirone 7

Offline Garyola

  • Board Homesteader!
  • ***
  • Posts: 250
    • http://www.mulcahey.com
My hump.
« Reply #2 on: June 10, 2007, 09:40:41 PM »
Looks good, Mike.
Did this bike go down at some point?

G

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
My hump.
« Reply #3 on: June 10, 2007, 09:55:15 PM »
My bikes been down more times then a parkdale street hooker.

The only real damage was from a lowside by the previous owner -- a scuffed exhaust, lightly grated right hand engine cover (which I have a replacement for, but have never installed), dents in the tank (which I had filled and repainted) and a bent rear brake lever (which is fixed, but still shows some scares). The fender looks a little wonky in the first picutre, but it's not subframe damage, its bolts that are MIA.

These bikes are pretty tough. I've dropped it on both sides, but haven't ever really messed it up.
Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline Garyola

  • Board Homesteader!
  • ***
  • Posts: 250
    • http://www.mulcahey.com
My hump.
« Reply #4 on: June 10, 2007, 11:02:24 PM »
Yes I can see the hugger is out of sorts but that subframe looks like it's out some too. I had this happen to my B12 from  a get off I had. I used a steel bar to straighten it right up again.

G

PS: and since when are you in the know about Parkdale hookers?   :lol:

Offline 92mx83

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 59
My hump.
« Reply #5 on: June 10, 2007, 11:14:40 PM »
Now that's just plain sexy... :bigok:
"Crush enemies, see them driven before you, and hear the lamentation of the women!" - Conan the Barbarian, on what is good in life

Offline JmuRiz

  • Board Homesteader!
  • ***
  • Posts: 217
My hump.
« Reply #6 on: June 11, 2007, 12:57:34 PM »
Very cool looking tail.  How was the fender eliminator made?  Is it a shaved down stock part or something custom?
I think we'd all benefit (in the looks dept) with this mod.
Nathan

'91 GSF 400
'90 FZR 400
'65 Ducati Falcon 80

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
My hump.
« Reply #7 on: June 11, 2007, 08:31:46 PM »
Quote from: "Garyola"
Yes I can see the hugger is out of sorts but that subframe looks like it's out some too. I had this happen to my B12 from  a get off I had. I used a steel bar to straighten it right up again.


I'm going to go on a mission this weekend to source the missing bolts. After I get everything fastened down I'll take a look and see if the tail looks out of sorts. I may have to go the big bar route...

Quote from: "Garyola"
PS: and since when are you in the know about Parkdale hookers?   :lol:


I just thought I'd throw in some local humour. I'm not really in the know per say. But by the number of hookers that have offices in that area -- I'd say it's being well serviced.
Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
My hump.
« Reply #8 on: June 11, 2007, 09:32:40 PM »
Quote from: JmuRiz
Very cool looking tail.  How was the fender eliminator made?  Is it a shaved down stock part or something custom?

I didn't do the mod -- Krautwagen did. I just bolted on his parts. But from what I can tell here's what was done. Dave feel free to clarify if I've got anything wrong.

I've attached a photo of the stock fender. I've indicated where it was cut. Then a couple of holes were drilled in the sides to mount the indicators. A couple of brackets were screwed to the top to hold the plate holder. Plate light bolts were used for the lighting.

« Last Edit: August 29, 2010, 08:09:30 PM by interfuse »
Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline JmuRiz

  • Board Homesteader!
  • ***
  • Posts: 217
My hump.
« Reply #9 on: June 12, 2007, 04:39:33 PM »
Excellent, thanks for the heads up.
Nathan

'91 GSF 400
'90 FZR 400
'65 Ducati Falcon 80

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
My hump.
« Reply #10 on: June 17, 2007, 01:33:28 AM »
lets bring back the lovely lady hump  :lol:
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
Re: My hump **UPDATED**
« Reply #11 on: August 29, 2010, 08:14:34 PM »
Picked up a solo seat cowl from a board member. Here's my revised hump!

Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline tomacGTi

  • Board Homesteader!
  • ***
  • Posts: 663
Re: My hump.
« Reply #12 on: August 30, 2010, 11:51:57 AM »
Our bikes look like they're a year apart Mike, reservoir, cowl.

Had the same look going and still do to an extent but just a slight bit different now.