Author Topic: circuit diagram (Read 2408 times)

rolandogval · « **on:** December 14, 2005, 04:09:10 PM »

hi there...
the latest in my gsf400 woes...i had previously taken the bike to have the carbs cleaned; this was done at a surprisingly reasonable rate out in suburban new jersey. however, upon inspecting the bike, they didn't pick up on the fact that it has been blowing fuses. the little bandit ran well about one ride, before it started blowing fuses. Now the headlight, turnsignals, and tachometer aren't working, but it still starts.

i checked the manual for a good circuit diagram, but didn't find anything substantial. Does anyone have anything that might help, in terms of seeing
what's wired where/how?

thanks,

-rolando

gsxr400 racer · « **Reply #1 on:** December 14, 2005, 08:34:56 PM »

[/URL][/img]

rolandogval · « **Reply #2 on:** December 15, 2005, 02:31:42 PM »

this diagram is too small...
can you send the full-sized file to me?

rolval@gmail.com

thanks!
-rolando

gsxr400 racer · « **Reply #3 on:** December 15, 2005, 07:08:55 PM »

save the image on yur computer then use photo shop to blow it up as big as ya want!

PitterB4 · « **Reply #4 on:** December 15, 2005, 07:39:53 PM »

Dude - that's too small. If you blow it up enough to see it, you lose all clarity. I may have a better one around somewhere. If you have a shop manual, this diagram is straight out of it (way in the back). You can also try downloading it from the manual in the Members Only section of the BBS.