Author Topic: criiikkkeee, the holy grail of exhaust for the b4 (Read 6633 times)

gsxr400 racer · « **Reply #15 on:** October 13, 2006, 06:05:02 PM »

Ok here is the thing none of these are gsxr 400 pipes they are all bndit pipes they would fit on my gsxr 4 if i switched oil pans and as would a gsxr 4 pipe fit if you switched oil pans those cross over tubes help the midrange to think that the pipe is longer than it is when the revs are low as the revs gain they hardly do anything and the pipe is back to same lenght you see sorta like a illusion but yes they work good. As far as those pipes fitting a b4vv im not sure some say no some say yes it seems to me that they do because someone from on here has a beet nasert r tittanium pipe that was for a b4 and it is on there b4 vv. hope that helps.
cheers
Jay

devilears · « **Reply #16 on:** October 14, 2006, 04:38:59 AM »

They will fit on the b4 vv model as I have the vv model and have that exact pipe on my bike. The Yosh cyclone carbon fibre system with the crossover pipes exactly as in the picture.

gsxr400 racer · « **Reply #17 on:** October 15, 2006, 05:21:11 PM »

GILAD missed your pipe brother maybe I'll find another for you just ignore the invoice!
cheers
JaY

gsxr400 racer · « **Reply #18 on:** October 15, 2006, 07:20:50 PM »

this is my favorite pipe beet nasert r tittanium the bomb diggity

http://page.okshon.com/v.cgi?YYurl=http://page2.auctions.yahoo.co.jp/jp/auction/b69827187

interfuse · « **Reply #19 on:** October 16, 2006, 12:57:32 AM »

Quote from: gsxr400 racer

this is my favorite pipe beet nasert r tittanium the bomb diggity

Agreed. When they were available new a few years back they were running for something like $1300 US. Someone buy that pipe!

gsxr400 racer · « **Reply #20 on:** October 16, 2006, 12:59:36 AM »

Giland, is making a attempt!

gsxr400 racer · « **Reply #21 on:** October 17, 2006, 02:57:37 PM »

http://page.okshon.com/v.cgi?YYurl=http://page12.auctions.yahoo.co.jp/jp/auction/p67574592

Herr Tod · « **Reply #22 on:** October 17, 2006, 03:12:42 PM »

That should be made punishable by law

JmuRiz · « **Reply #23 on:** October 17, 2006, 05:18:14 PM »

OK, with all these crazy pipes you are showing us, what the heck are you going to have on your racebike and your B4 based project?!

El Dopa · « **Reply #24 on:** October 18, 2006, 01:41:32 AM »

Quote from: gsxr400 racer

gsxr 4 if i switched oil pans and as would a gsxr 4 pipe fit if you switched oil pans those cross over tubes help the midrange to think that the pipe is longer than it is when the revs are low as the revs gain they hardly do anything and the pipe is back to same lenght you see sorta like a illusion but yes they work good.
cheers
Jay

I was wondering what those crossover pipes were for.

Question: Do you happen to know if the oil pan/sump from a GSX400F is the same as the GSX-R400R pan/aump.

Best info I can find says they use the same engine, but the exhaust setup on the photos I've seen looks slightly different.

gsxr400 racer · « **Reply #25 on:** October 20, 2006, 06:59:18 PM »

gsx should be more like the gsf