Author Topic: Petcock  (Read 3394 times)

Offline stefanoascari

  • TURBO TYPER!
  • **
  • Posts: 42
Petcock
« on: July 03, 2012, 01:30:07 PM »
Hi,
I have a suspicion my petcock is leaking. Any ideas on where to find a replacement or a rebuild kit? I see universal petcocks for sale but I don't know if they are compatible.

Offline HD

  • TURBO TYPER!
  • **
  • Posts: 26
Re: Petcock
« Reply #1 on: July 03, 2012, 02:50:25 PM »
eBay is your best bet. Why do you suspect it is leaking?

Offline stefanoascari

  • TURBO TYPER!
  • **
  • Posts: 42
Re: Petcock
« Reply #2 on: July 03, 2012, 02:52:39 PM »
i had fuel pass through rings and make its way into oil. I checked the carbs and they seem fine (although I don't have a trained eye). If I pick the tank up and tip it on the side it squirts out quite a bit.

Offline tomacGTi

  • Board Homesteader!
  • ***
  • Posts: 663
Re: Petcock
« Reply #3 on: July 04, 2012, 08:26:49 AM »
That can only happen if it's leaking down the vacuum signal tube into #1. Pretty obvious way to check that. Barring that, the float valves in the carbs may be getting tired as well.

Replacement OEM can be expensive, I personally went with a Pingel and just shut it off myself.

Offline stefanoascari

  • TURBO TYPER!
  • **
  • Posts: 42
Re: Petcock
« Reply #4 on: July 04, 2012, 11:34:32 AM »
Thanks for the info. I'm sorry I don't quite follow.

Is the vacuum signal tube the main fuel line? And were you referring to pingel as a source for a replacement petcock?

Thanks

Offline tomacGTi

  • Board Homesteader!
  • ***
  • Posts: 663
Re: Petcock
« Reply #5 on: July 04, 2012, 03:27:27 PM »
Pingel is a petcock manufacturer.

The vacuum signal hose is a small hose on the backside of the OEM petcock. When the engine fires, it creates a vacuum that activates a diaphram that starts fuel flow.

Check and see if there is fuel in the signal hose first, if dry it's good. This means it could be a case of you having to replace the float valves in the carbs. Those are cheaper than a petcock for sure.
« Last Edit: July 04, 2012, 03:33:01 PM by tomacGTi »

Offline stefanoascari

  • TURBO TYPER!
  • **
  • Posts: 42
Re: Petcock
« Reply #6 on: July 04, 2012, 04:41:56 PM »
Ok. Cool. When you say float valves, do you mean the needles?

Thanks

Offline tomacGTi

  • Board Homesteader!
  • ***
  • Posts: 663
Re: Petcock
« Reply #7 on: July 08, 2012, 08:26:13 AM »
yes.