Author Topic: cutting out engine  (Read 2643 times)

Offline Spacey86

  • Board Homesteader!
  • ***
  • Posts: 54
cutting out engine
« on: August 22, 2005, 05:39:28 PM »
Hi there guys, got a small problem to do with my engine cutting out. Under heavy breaking to a stop the engine totally cuts out, and then will be really hard to restart takes about 10 seconds of holding the starter, can be very embarrassing when it happens in town!

This little problem has got everybody in my local shop baffled and my for that matter, so if anybody has any ideas on what I could possibly be, please, please, please say no matter how silly, really need help on this one.

Thanks guys----Dave

Oh ye you don’t even have to be breaking from a massive speed for it to happen, will happen at about 20 Mph
If at first it don't fit .......... Smack it with a hammer(might be the reason my B4 is nackered)

Offline PitterB4

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 3698
cutting out engine
« Reply #1 on: August 22, 2005, 07:56:24 PM »
Not sure what the problem is but this is at least the second person to post this problem (unless you posted before).  :headscratch:

When it refires, does it smell like it was flooded?  It almost sounds like the force of breaking is causing too much fuel to get by.  Weird.
Rob
Bikeless!
'93 Bandit 400 - SOLD
'98 Honda F3 Track Bike - SOLD
'98 Kawi ZX-6R Street Bike - SOLD
NESBA #87 - RETIRED
'00 Gary Fisher Kaitai
'09 Bianchi Via Nirone 7

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
cutting out engine
« Reply #2 on: August 22, 2005, 08:21:06 PM »
check your
1 plugs
2 side stand switch
3 your fuel screws
4 float hight (does it strat easier w/ the throttle opened up after?)
5 your on yur own!
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
cutting out engine
« Reply #3 on: August 23, 2005, 12:15:04 AM »
What Jay said. I had the same problem. Went away when I adjusted the float hieghts.
Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline Thief400

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 378
    • http://www.members.shaw.ca/cgard
cutting out engine
« Reply #4 on: August 23, 2005, 09:24:08 AM »
Check the float hieghts,  :beers:

Offline Spacey86

  • Board Homesteader!
  • ***
  • Posts: 54
cutting out engine
« Reply #5 on: August 23, 2005, 02:31:51 PM »
no it does not smell like it has, flodded, which is what we originally thought. Will go throught the list posted by gixer racer. will see if this helps/solves the problem. Will have to do a lot of test rides Dam!!!!!!!

Thanks guys will post the results. :thanks:  :thanks:
BTW, this is the first time i have posted this.
If at first it don't fit .......... Smack it with a hammer(might be the reason my B4 is nackered)

Offline Spacey86

  • Board Homesteader!
  • ***
  • Posts: 54
cutting out engine
« Reply #6 on: August 25, 2005, 04:42:46 PM »
hey dudes, tryed all of the things that people have posted, has seemed to have worked, but as i did them all at the same time, came pin point which one it was, thanks guys don't know what i would do with out this site, it kicks major ass. :thanks:  :thanks:  :thanks:  :thanks:  :thanks:  :thanks:  :thanks:
If at first it don't fit .......... Smack it with a hammer(might be the reason my B4 is nackered)