« previous next »
Pages: 1 [2]

Author Topic: here is the crank to stroke your bandit or gsxr!  (Read 5479 times)

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
here is the crank to stroke your bandit or gsxr!
« Reply #15 on: April 16, 2007, 12:50:45 PM »
I'm sure Brian is very capable , he has a racing background. Just a small assumption on my part! LOL
Anyways bearings read the code on the crank match it up with the codes on the cases plastigauge and go from there. I would get it lightened for sure as it is heavier than the b4 73 crank. But this is the same set up that factory Suzuki used in japan on the 76a gsxr but with a newer crank same model ( difference in cranks from a 76 and a 73/b4. 76 crank gears are straight cut (which means that they don't have side pull ( which some engineer will be able to describe what this means more) You can use a 76 but you need the clutch basket to go with it. You can also use a complete 76 bottom end and cylinder, and have a spin on oil filter but here is the kicker you may as well call it a rf400 motor pics to follow this goes right in the b4 or 73a) Back to the crank the b4 and 73a are identical both have the helical? or slashed cut gears as is the clutch basket main gears.)))) Do some research the b4 the 73a the 76a the rf400 the 71f the impulse and the katana 400 and the vv there are all parts bin bikes from Suzuki and share a lot of parts.
Logged
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
here is the crank to stroke your bandit or gsxr!
« Reply #16 on: April 16, 2007, 01:26:48 PM »
B4 vv crank

Logged
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
here is the crank to stroke your bandit or gsxr!
« Reply #17 on: April 16, 2007, 01:37:34 PM »
RF400 motor dam side covers are a dime a dozen now.





Logged
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
here is the crank to stroke your bandit or gsxr!
« Reply #18 on: April 18, 2007, 11:18:59 AM »
Crank sold i helped a brother get it from the bored and i'll let him tell you about it. He should have the fastest b4 or should i say b5 around.
Logged
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline JmuRiz

  • Board Homesteader!
  • ***
  • Posts: 217
here is the crank to stroke your bandit or gsxr!
« Reply #19 on: April 18, 2007, 12:34:12 PM »
Awesome, a ~500cc bandit will be very cool.

You'd probably have to go with a GSXR400 curved radiator at least right?
Logged
Nathan

'91 GSF 400
'90 FZR 400
'65 Ducati Falcon 80

Offline Bartjan

  • Board Homesteader!
  • ***
  • Posts: 272
here is the crank to stroke your bandit or gsxr!
« Reply #20 on: April 18, 2007, 12:54:49 PM »
sorry BrianM, but it is me who got it...
i hope your not mad  :wink: but its perfect for the pistons i alreaddy ordered

the pistons i ordered are 59mm pistons which are lower then the standard pistons. So i dont have to raise or lower the top-end alot, which is good for the camshaftchain. So it will become a B5 idd.
495cc instead of 398cc  :motorsmile:

it will probably take a few months before everything is good to go, so i should go and get a dynorun beforehand to compare...

about the radiator: i guess i will find out, doesnt matter as i also have some other (honda rvfr400 and honda nsr50) radiators lying around
Logged
1991 US Bandit 400

Offline BrianM

  • Board Homesteader!
  • ***
  • Posts: 179
here is the crank to stroke your bandit or gsxr!
« Reply #21 on: April 18, 2007, 10:27:24 PM »
No worries from here, I'm working on suspension first (have my Fox ready to go on tomorrow afternoon and still shopping for 41mm RSU cartridge forks so I can keep the stock look but get all the benefit of cartridge forks)...  I'm more a 'handling' kinda guy than power.

But I do have one Really low compression cylinder, and I liked the idea of doing a B5.  But I'll probably just do Jays 442 kit next winter (or the one after that....  or maybe it's just valves, and I won't bother with anything to the cylinders ~ need to put a leak-down tester on it).
Logged
Cheers,

     BrianM ~ 1991 Bandit 400

Offline Postal

  • TURBO TYPER!
  • **
  • Posts: 21
here is the crank to stroke your bandit or gsxr!
« Reply #22 on: April 19, 2007, 05:48:57 AM »
The info on this crank needs a sticky so that other who wish to build a B5, including me, can easily reference it.
Logged

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
here is the crank to stroke your bandit or gsxr!
« Reply #23 on: April 19, 2007, 09:23:22 AM »
Quote from: "BrianM"

But I do have one Really low compression cylinder, and I liked the idea of doing a B5.  But I'll probably just do Jays 442 kit next winter (or the one after that....  or maybe it's just valves, and I won't bother with anything to the cylinders ~ need to put a leak-down tester on it).


LOL , Make up your mind woman! (Sorry ladies let the canning begin)
Logged
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
here is the crank to stroke your bandit or gsxr!
« Reply #24 on: April 19, 2007, 10:04:25 AM »
Quote from: "Postal"
The info on this crank needs a sticky so that other who wish to build a B5, including me, can easily reference it.


Maybe we can get Jay to write up a new topic on B4 engine mods covering cams, cranks, big-bore kits, etc. and just put it in the B4 FAQ...

Red01 > :stickpoke: < gsxr400 racer
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline Bartjan

  • Board Homesteader!
  • ***
  • Posts: 272
here is the crank to stroke your bandit or gsxr!
« Reply #25 on: April 19, 2007, 10:16:28 AM »
you mean you dont know where the search button is?  :stickpoke:

just for the info:
as you can see here, GSXR400 from 1984 till 1986 have the bore and stroke of 53x45.2mm and as you can see here, so does the gsx400fs impulse from 1982 till 1985

as you can see here and here the gsx400 impulse from 1994 and onwards has a stroke and bore of 52x47mm, so it could even be possible to go further  :bomb:
Logged
1991 US Bandit 400
Pages: 1 [2]
« previous next »