Selling / Parting out my 1991 B400

[Craig806]

Hi All, I am going to be parting out my b400 - or selling it

I live in northwest NJ in Warren County. I’m open for offers for the whole thing if you are able to pick it up.

Let me know the parts you need or want and I’ll start dismantling to post on eBay. I'll re-post to let you know when the parts are up.

I'm going to be in the garage tomorrow afternoon working on my car and may have some time to start dismantling

Condition: Bought it last spring.  On a whole the bike was running fine but idling a little high at 2,000rpm. Just before the fall, the engine had difficulty getting started. I went in to change the spark plugs thinking it would help and a wire broke free from one of the boots so the wiring from the coils to the plugs definitely needs replacement. I suspect the coils or cdi may be contributing to the problem. That said, i added stabilizer to the tank before garaging for the winter but with broken wiring it hasn’t run since fall so the carbs will likely need a cleaning.  

NEW: brake pads, brake fluid flushed, battery, Regulator Rectifier.

Getting rid of it for several reasons: Money, Time, Seeing too many motorcycle fatalities at work (auto claims), my fiancé, having to drive to PA to garage it at my parents, etc.

PHOTO: http://bikepics.com/pictures/2233282/

 

[Sean]

How much do you want for your wiring harness and the little plastic square that goes directly behind the passenger seat? I def want the plastic square if the price is right.

[Vested]

How much do you want for the front fender?

[canyonbreeze]

The muffler and petcock?

[Craig806]

I've got all the parts requested!

I should have a change to start pulling the bike apart before the end of the month to list parts and start shipping.

I'll get back to you all on the prices soon!

[Craig806]

Hi Guys!

I am driving to the parent’s garage this Saturday to begin dismantling the B400

Parts will be ready to ship on Monday / Tuesday

Please post, pm me or email me any other part requests you have!

Everyone that already requested a Part, please PM me with your email address or email me directly at craig.alaburda@gmail.com and I will email you a photo of the part, my asking price and a papal account for payment.

I'll be posting the rest of it to Ebay throughout the week!

Anyone willing to drive out to pick up the larger bits – Engine & Trans, Frame, etc. It’s all located in Bangor, PA or may be relocated to Hackettstown NJ.
 
EMAIL: Craig.Alaburda@gmail.com

 

[Craig806]

I tore into my B400 today & I emailed and PMd everyone who asked about parts.
I’ll be posting them all to Ebay this week so please contact me if you want anything

Email: Craig.Alaburda@gmail.com

Anyone interested in the carburetor or engine?

[Craig806]

Hi All,

Most of the parts are listed on eBay! You can see them at:  http://motors.shop.ebay.com/craigifer806/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

A few parts have already been snatched up.

The parts I was emailed / PMed about have not been posted.

I still need to remove a few more parts from the bike.

If anyone is interested, these parts will be available within a few weeks: (email me)
Fuel Tank, Wheels, Frame, Engine, Swing arm, Rear Shock, Front forks & yolk, rear caliper, rear brake lines,  rear master cylinder, handlebars, ignition coils, starter motor, speedometer assembly, fairly new sprockets (less than 50 miles).

My Email: Craig.Alaburda@Gmail.com

 

[Craig806]

Hi All,

I haven't finished dismantling yet (car problems are a bummer) but I did manage to pull off a few more parts that will be listed shortly: Starter, Ignition Coils, Thermostat assembly with coolant cap and hoses.

A bunch of parts have already been snatched up by other buyers.

You can see whats already listed at:  http://motors.shop.ebay.com/craigifer806/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

If anyone is interested, these parts will be available within a few weeks: (email me)
Fuel Tank, Petcock, Wheels, Frame with Title, Engine, Swing arm, Rear Shock, Front forks & yolk, rear caliper, rear brake lines,  rear master cylinder, handlebars, fairly new sprockets (less than 50 miles).

My Email: Craig.Alaburda@Gmail.com

The bigger parts are located near Bangor, PA for local pickup if interested.

 

[SwissWatch]

Emailed you with some parts inquiries!

Thanks

[HD]

Do you still have the carbs?

Thanks

[Craig806]

Hi Guys, there are still parts left!

You can see at:  http://motors.shop.ebay.com/craigifer806/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

Email me if you are looking for anything you dont see.
Most of the bike has been sold at this point.

I put up a seperate post regarding the engine/frame/swingarm

Dont PM me, Please Email me Craig.Alaburda@Gmail.com