Author Topic: Slipping Gear (Read 6930 times)

Vidrazor · « **Reply #15 on:** October 09, 2007, 11:46:40 AM »

[Maybe you can descibe your "slipping" problem at high revs again?]

In second, if I rev the engine up too quickly, the drive drops out and the engine revs up, as would happen if you pulled the clutch in.

If I raise the revs moderately, I can get up a bit higher to a given rev, but it will still "drop out" at a certain rev (not sure which rev that is).

I can ride the bike at lower revs, it runs normally.

gsxr400 racer · « **Reply #16 on:** October 09, 2007, 11:49:13 AM »

2nd gear going out or a bad shift fork

pmackie · « **Reply #17 on:** October 09, 2007, 12:31:34 PM »

I agree with Jay

Sounds like either a bent shift fork, or the dogs on the gears are rounded. Either way, a proper fix will involve disassembly of the engine and replacing parts in the transmission.

gsxr400 racer · « **Reply #18 on:** October 09, 2007, 07:19:45 PM »

the shift fork can be replaced with out taking the motor out of the bike, one nice thing about this suzuki