Author Topic: [Israel] my "Suzi" with FactoryPro Stage3  (Read 7371 times)

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
[Israel] my "Suzi" with FactoryPro Stage3
« Reply #15 on: December 14, 2006, 12:35:38 PM »
when you let off the gas does it crackle alot the exhaust?
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline 2Fast4U

  • TURBO TYPER!
  • **
  • Posts: 47
[Israel] my "Suzi" with FactoryPro Stage3
« Reply #16 on: December 14, 2006, 08:52:14 PM »
Quote from: "gsxr400 racer"
when you let off the gas does it crackle alot the exhaust?


aaaaaaaaa, no.

what if it was :?:

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
[Israel] my "Suzi" with FactoryPro Stage3
« Reply #17 on: December 14, 2006, 08:57:32 PM »
be to lean on the down rev  would have to change fuel screw settings and or pilot jets
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline Banditmax

  • Board Homesteader!
  • ***
  • Posts: 519
Re: [Israel] my "Suzi" with FactoryPro Stage3
« Reply #18 on: September 03, 2008, 04:05:00 PM »
Right i have a non believer of a friend who thinks that you cannot fit pods to a gk73a/bandit. so someone find me somewhere that sells pods like these please.

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: [Israel] my "Suzi" with FactoryPro Stage3
« Reply #19 on: September 03, 2008, 04:36:17 PM »
1. Contact Factory Pro and ask if they still carry (or can get) BMC's 3092 kit.
2. Armed with the diameter of the carbs' bellmouth, you can buy the appropriate K&N pods from any K&N dealer.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline Banditmax

  • Board Homesteader!
  • ***
  • Posts: 519
Re: [Israel] my "Suzi" with FactoryPro Stage3
« Reply #20 on: September 03, 2008, 04:38:47 PM »
yeah he claims the 3092's don't fit though.

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Re: [Israel] my "Suzi" with FactoryPro Stage3
« Reply #21 on: September 03, 2008, 04:59:37 PM »
Thats how i rolled max with pods on my gsxr when it was stock and a stage 3
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline Banditmax

  • Board Homesteader!
  • ***
  • Posts: 519
Re: [Israel] my "Suzi" with FactoryPro Stage3
« Reply #22 on: September 03, 2008, 05:01:35 PM »
Do you know which pods though jay? k&n dont seem to make any.....

Offline VW_NUT

  • Board Homesteader!
  • ***
  • Posts: 86
Re: [Israel] my "Suzi" with FactoryPro Stage3
« Reply #23 on: September 03, 2008, 05:27:13 PM »
Right i have a non believer of a friend who thinks that you cannot fit pods to a gk73a/bandit. so someone find me somewhere that sells pods like these please.

I believe you can get universal filters from UNI.  I've had good luck with the foam filters & they are cheaper than K&N. 

Offline skibum

  • Board Homesteader!
  • ***
  • Posts: 89
Re: [Israel] my "Suzi" with FactoryPro Stage3
« Reply #24 on: September 03, 2008, 06:56:02 PM »
Love the look of the pods.  :thumb:  Wish I had the balls to go to this setup, but it took me sooooo long to dial in the jetting after installation of the Yoshi pipe and K&N filter that I'm afraid to try anything else.  :nuts:
I'm having fun.  Are you having fun?  I'm having fun.

Offline andrewsw

  • Board Homesteader!
  • ***
  • Posts: 598
Re: [Israel] my "Suzi" with FactoryPro Stage3
« Reply #25 on: September 04, 2008, 10:40:32 PM »
I'd be afraid of killing the mileage even more... sheesh. The only bike that ran out of gas on the PNW Bandit Rally 2008 was my poor little B4. 100 miles of WOT in the mountains is an empty tank... :annoy:

Anyway, I have a friend who claims to be Suzuki factory trained... whatever... but he claims that pods are a disaster because of turbulence. I then to think the side covers would alleviate that, but what do I know. Anyone have definitive insight into the performance of pods on the B4?

A

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Re: [Israel] my "Suzi" with FactoryPro Stage3
« Reply #26 on: September 06, 2008, 11:41:16 AM »
this is how the pods where on my bike when it was stock made 55hp the rubber mounts that go to the air box from the carbs to the box where taken out of the air box mounted to the carbs then the pods slide over that... Dont ask me thats how i bought it we ran it on the dyno and that what it made
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol