Author Topic: Need a little advice for a newbie  (Read 4531 times)

Offline AndrewG

  • First Post! Be Gentle!
  • *
  • Posts: 1
Need a little advice for a newbie
« on: March 30, 2005, 08:46:56 PM »
About a year ago I purchased a 1986? maybe 1987 GSXR400. This bike had been brought into the US by a guy in California in the Navy. It has a good California Title. It has about 90,000 Km on it and is in pretty rough condition mechanically. From what I gather it has had the engine replaced with a 400 Bandit motor.
  The issues are: It seems that they butchered up the GSXR intakes to use the weirdo 2 into 1 carbs off the gsxr and I think they put in the GSXR cams. Regardless, it runs like crap (also leaks oil like a seive). i am looking for at least a set of bandit carbs and intakes, or perhaps an entire Bandit engine. Otherwise, I will part it out or sell it as is. It is really a cool little bike and very rare for the United States.
  Any advice or suggestions??
 Thanks in advance from a newbie,
 -AndrewG

Offline Thief400

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 378
    • http://www.members.shaw.ca/cgard
Need a little advice for a newbie
« Reply #1 on: March 30, 2005, 11:11:48 PM »
I see you found us, welcome  :banana:

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Need a little advice for a newbie
« Reply #2 on: March 31, 2005, 11:49:41 AM »
you my freind have a gk71 has double barrel carbs. you want to go to www.greybike.co.uk and find a member name furry he is the gk71 pro and has parts gallore .also there are 71 parts on the www.ebay.co.uk site for the 71 right now . hope that helps mines a bit newer than yours.
jay
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline Maniac

  • Board Homesteader!
  • ***
  • Posts: 524
    • http://www.bikepics.com/members/plan9/93bandit400/
Need a little advice for a newbie
« Reply #3 on: March 31, 2005, 01:44:37 PM »
It took 15:03 for our resident GSXR400 guru to chime in...

Your getting slow in your old age, Jay!  :grin:


Like everyone else has said, welcome to the board!  :beers:

2008 GSXR-750

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Need a little advice for a newbie
« Reply #4 on: March 31, 2005, 08:54:26 PM »
:idea: I think he gave a reasonable explanation when he wrote the busy getting ready for racing!! thread.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline PitterB4

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 3698
Need a little advice for a newbie
« Reply #5 on: March 31, 2005, 09:53:44 PM »
Quote from: "Red01"
:idea: I think he gave a reasonable explanation when he wrote the busy getting ready for racing!! thread.


Excuses, excuses...  :monkeymoon:
Rob
Bikeless!
'93 Bandit 400 - SOLD
'98 Honda F3 Track Bike - SOLD
'98 Kawi ZX-6R Street Bike - SOLD
NESBA #87 - RETIRED
'00 Gary Fisher Kaitai
'09 Bianchi Via Nirone 7

Offline Thief400

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 378
    • http://www.members.shaw.ca/cgard
Need a little advice for a newbie
« Reply #6 on: March 31, 2005, 10:24:58 PM »
MMMMMMMMmmmmmmmmm  I raced in a vintage Moto X race last year where both the bike and I could be classified as Vintage LOL .... and as the saying goes the Older I get the Faster I was!!!!

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Need a little advice for a newbie
« Reply #7 on: March 31, 2005, 10:38:00 PM »
Like the time you beat Roger DeCoster to turn 1?  :bigok:
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline Azvista455

  • New user!
  • *
  • Posts: 3
Need a little advice for a newbie
« Reply #8 on: April 01, 2005, 12:34:55 PM »
If you do decide to sell it, please let me know.  I'm in Phoenix and would love to get my hands on a GSXR400 as a project.

John