Author Topic: Need some help  (Read 3536 times)

Offline Garyola

  • Board Homesteader!
  • ***
  • Posts: 250
    • http://www.mulcahey.com
Need some help
« on: May 10, 2008, 07:02:08 PM »
My bike is doing a couple of crazy things. Sometimes it works great and others not so good.

Symptoms:

Tack is going crazy. Readings are all over the place and the needle is bouncing around.

Stalls when not on the throttle

Bike is starting to miss.

Is it a rectifier or CDI box or both or should I just burn the damn thing?


G




Offline Banditmax

  • Board Homesteader!
  • ***
  • Posts: 519
Re: Need some help
« Reply #1 on: May 10, 2008, 08:20:53 PM »
cdi seems a possibility. check what volts its giving you at the battery first though. And also the connections to the coils and plugs.

Offline PitterB4

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 3698
Re: Need some help
« Reply #2 on: May 11, 2008, 12:08:47 AM »
I'm thinkin' connections to the coils.  Easy fix!   :bigok:
Rob
Bikeless!
'93 Bandit 400 - SOLD
'98 Honda F3 Track Bike - SOLD
'98 Kawi ZX-6R Street Bike - SOLD
NESBA #87 - RETIRED
'00 Gary Fisher Kaitai
'09 Bianchi Via Nirone 7

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
Re: Need some help
« Reply #3 on: May 11, 2008, 01:55:55 AM »
Test the RR  Put a meter across the battery and rev to 5k. I think you want around 15v. Much more or much less and the RR is bad. (suzuki RR's from that time period are known to be crap, gs500's run the same RR if you want to try swapping it).

Also what Rob said. The 12v wires to the coils get take quite a bit of damage shaking around at highway speeds.... idle the bike and jiggle those wires and see if it stalls.. then you know which wires to re-crimp. Or figure out which pipes are getting hot and narrow it down to what coils has a problem... 

I've got spare coils here if you want to try swapping them.

Keep us posted and stay away from the matches!!


Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
Re: Need some help
« Reply #4 on: May 11, 2008, 02:01:21 AM »
If nothing works and you're desperate you can trailer your bike over and swap the CDI with mine... I've got nice big underground garage you can test it in...


Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Re: Need some help
« Reply #5 on: May 11, 2008, 02:06:10 AM »
low battery voltage tac goes nuts i run total lose and this is the first thing that happens when my bat gets low you need to have your battery load tested as well as check the charging voltage and make sure the connector to the reg/ reg is tight and not metled.
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Re: Need some help
« Reply #6 on: May 11, 2008, 02:07:15 AM »
or could be bad coil power wires as rob said or a bad coil. :banghead:
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline Garyola

  • Board Homesteader!
  • ***
  • Posts: 250
    • http://www.mulcahey.com
Re: Need some help
« Reply #7 on: May 11, 2008, 10:17:13 AM »
:thanks:


Thanks Guys

This is all the info I was looking for.
Mike, thanks for the offer. You are prince but I have lots of spares and space.
Jay, I fixed the fairing and will post a pic when I get a second.

I will get on this over the next few days and tell you all how it worked out. I really appreciate all your help.

Cheers lads

G

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Re: Need some help
« Reply #8 on: May 11, 2008, 11:35:03 AM »
Hey man I appriciate you holding down the racing fort :thumb:
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol