Author Topic: Pod Filters (Read 3140 times)

MaccDaddy · « **on:** August 30, 2005, 06:59:59 AM »

Can I use (install) Pod filters to my Baby without having to re-jet?
And has any one done this befor?!?!?!?!?!?

PitterB4 · « **Reply #1 on:** August 31, 2005, 08:43:54 AM »

Obviously, I've never worked on a 250 but I would imagine you would definitely have to rejet. Just by punching a couple 1 inch holes in my airbox, I'm up about 4-5 sizes on my mains. Pods would flow a ton more air than my modded airbox. Also - how do the plastic side panels attach on the 250? On the 400, it bolts into the airbox. You'd have to figger somthing out there, too. Good luck!

MaccDaddy · « **Reply #2 on:** September 01, 2005, 05:18:01 AM »

cheers rob I will go with the re-jet anyway. Also the side pannels attach to the frame and the tank so there would be no probs there.

Macca

SUZI · « **Reply #3 on:** September 01, 2005, 09:53:07 PM »

I had looked into the idea but was told by the mechanic at the local Suzuki dealer that this would actualy cause problems with the consistancy of the air/fuel mixture to each carby resulting in balancing problems.

The reason I was told was that the airbox is designed to maintain consistancy in air pressure/flow/volume that each carby draws on.

As a result, I never went ahead with the idea so I cannot tell you if this is true or not.

MaccDaddy · « **Reply #4 on:** September 02, 2005, 10:34:18 AM »

You know suzi that actually makes alot of sence, I think I will leave well enough alone and perhaps go with a new can and re-jet, cheers for the input everyone!