« previous next »
Pages: [1]

Author Topic: ??  (Read 2679 times)

Offline ???

  • Board Regular!
  • **
  • Posts: 16
??
« on: February 04, 2012, 10:12:45 AM »
??
« Last Edit: July 18, 2013, 02:02:52 AM by speedking »
Logged

Offline Chris H

  • Board Homesteader!
  • ***
  • Posts: 559
Re: Bandit400V TPS (gsf400vm)
« Reply #1 on: February 04, 2012, 04:38:32 PM »
Hi Ive got the official manual for the VVC but the tps gets no mention.
From what i understand its only for ignition advance, this being different for full and part throttle openings.
There is  a lot of info on the site regarding the TPS setting for the 1200 so i'd take some measurements and then compare these to the 1200's. You could at least use the percentage ratios for setting.
Heres the post-
http://forums.banditalley.net/index.php?topic=3447.0
« Last Edit: February 04, 2012, 04:58:21 PM by Chris H »
Logged

Offline Chris H

  • Board Homesteader!
  • ***
  • Posts: 559
Re: Bandit400V TPS (gsf400vm)
« Reply #2 on: February 16, 2012, 09:03:35 AM »
If i get chance over the weekend i will measure my carbs resistance.
Logged

Offline Chris H

  • Board Homesteader!
  • ***
  • Posts: 559
Re: Bandit400V TPS (gsf400vm)
« Reply #3 on: March 06, 2012, 03:15:18 PM »
What colours do you have on thr TPS?
I have black,green and blue.
Black to Blue is 4.13 ohm at any opening.
Black to Green is 0.33 closed and 3.89 open.
Green to Blue is 4.1 closed and 0.61 open.
Logged
Pages: [1]
« previous next »