Author Topic: slip on installed and a couple questions  (Read 1847 times)

Offline rolandoc

  • Board Regular!
  • **
  • Posts: 19
slip on installed and a couple questions
« on: March 24, 2007, 03:00:45 AM »
just installed a slip on to my 93 bandit 400. it starts, idles, and runs pretty smooth but feels like it auctually lost some power over stock. would the backpressure change from taking out the restricted stock exhaust do this or do i need to rejet? i don't have any backfiring at all and i can run choke all the way off and it will idle. any suggestions?
1993 Bandit 400

Offline Banditmax

  • Board Homesteader!
  • ***
  • Posts: 519
slip on installed and a couple questions
« Reply #1 on: March 24, 2007, 05:22:23 AM »
Sounds like you need to rejet a bit. Try riding it with the choke on half way and see if it gives you more power.

Offline rolandoc

  • Board Regular!
  • **
  • Posts: 19
slip on installed and a couple questions
« Reply #2 on: March 26, 2007, 09:10:24 AM »
well i moved the clip on the needle 1 position richer and the thing came back to life. going to bump up the mains a couple later this week.
1993 Bandit 400