Author Topic: YO MANIAC! (Read 3462 times)

gsxr400 racer · « **on:** October 09, 2005, 09:13:32 PM »

Maniac wrote:
oh, yeah, understand that. I just wanted the numbers to plug into my Dyno software so I can guesstimate what I should be producing.

Plug this into your dyno soft wear and tell me what you come up with this is what i degreed my cams to
IVO20
IVC30
EVO20
EVC37
_________________
1988 gsxr 400 sp (sprint bike)
2003 gsxr 600 endurance bike
wera expert 610

Maniac · « **Reply #1 on:** October 09, 2005, 11:09:47 PM »

RPM ----- HP --- Torque
=======================
2000 ----- 9 ------- 25
2500 ----- 15 ----- 31
3000 ----- 20 ----- 35
3500 ----- 24 ----- 36
4000 ----- 29 ----- 38
4500 ----- 34 ----- 40
5000 ----- 38 ----- 40
5500 ----- 42 ----- 40
6000 ----- 46 ----- 40
6500 ----- 49 ----- 40
7000 ----- 51 ----- 39
7500 ----- 53 ----- 37
8000 ----- 55 ----- 36
8500 ----- 56 ----- 35
9000 ----- 58 ----- 34
9500 ----- 58 ----- 32
10000 ---- 59 ----- 31
10500 ---- 60 ----- 30
11000 ---- 61 ----- 29

I don't think I have the proper data. For instance, I have no idea what the lift on those cams actually is and I'm not exactly sure how to flag the exhaust. I have it set for 'race headers' right now, changing the exhaust settings makes -massive- differences.

Is the difference between the stock cam and the GSXR cams just duration? Or is lift different as well? I'm using stock 0.240" lift numbers.

gsxr400 racer · « **Reply #2 on:** October 10, 2005, 02:11:26 AM »

I think it hit .262" lift on dial but really wasnt paying attention will double check in a later date as i just wanna hear it run then will re degree it

Maniac · « **Reply #3 on:** October 10, 2005, 09:31:19 AM »

I figured they had more lift as well as longer duration. Ok, I'll plug 0.264" in it when I get home tonight, probally 6pm or so. I'm also going to go down a step from 'race headers' because I'm not sure exactly what it's classifying those as.

Maybe I'll figure out how to raise the dyno cutoff point -above- 11k RPMs, but I'm not holding my breath.

Maniac · « **Reply #4 on:** October 10, 2005, 09:43:51 PM »

I couldn't find a way to get more dyno (above 11k RPM), but here's the revised guesstimates.

RPM ----- HP --- Torque
2000 ---- 11 ----- 29
2500 ---- 17 ----- 35
3000 ---- 20 ----- 35
3500 ---- 24 ----- 36
4000 ---- 29 ----- 39
4500 ---- 35 ----- 40
5000 ---- 38 ----- 40
5500 ---- 42 ----- 40
6000 ---- 46 ----- 40
6500 ---- 48 ----- 40
7000 ---- 50 ----- 38
7500 ---- 52 ----- 37
8000 ---- 55 ----- 36
8500 ---- 58 ----- 34
9000 ---- 59 ----- 34
9500 ---- 59 ----- 33
10000 --- 59 ----- 31
10500 --- 61 ----- 30
11000 --- 62 ----- 29

Now go get that thing on a real dyno!

gsxr400 racer · « **Reply #5 on:** October 11, 2005, 09:07:41 PM »

after i swap wiring harness

Maniac · « **Reply #6 on:** October 12, 2005, 12:36:34 AM »

That looks to be the problem, eh?

Hopefully I'll have a dyno soon too, won't be as nice as yours, I'm sure, but it should be a mite bit better than stock.