Author Topic: Shorter control cables (Read 3629 times)

magicGoose · « **on:** January 12, 2006, 09:10:01 AM »

I have a set of bars on my bike that puts the controls at a position similar to the Suburban Machinery bars. The riding position is way better than stock, but I have not been able to route the clutch, throttle and choke cables in a way I am happy with. I need cables a few inches shorter. Has anyone been down this road and found good replacements ? ( Ideally with a Suzuki part no.) I'm thinking maybe GSXR400 or Jap-spec bandit with the clip-ons.
If I can't find something suitable I will try to find someone who carries Motion Pro stuff and order all the bits to make them myself.

Regards,
Steve

PitterB4 · « **Reply #1 on:** January 12, 2006, 09:54:38 AM »

Good question, Steve. I have the SM bars and don't like the routing of my clutch cable at all.

gsxr400 racer · « **Reply #2 on:** January 12, 2006, 03:32:40 PM »

TERRY CABLE , look it up do a google search he will make any cable send themn yours and walaa you got a new one coming back!

Herr Tod · « **Reply #3 on:** January 12, 2006, 04:09:09 PM »

Get some soldering skills and make your own

PitterB4 · « **Reply #4 on:** January 12, 2006, 04:53:33 PM »

Quote from: "gsxr400 racer"

teery cable , look it up do a google search he will make any cable send themn yours and walaa you got a new one coming back!

Dude - try looking at the keyboard or the screen once in a while!

It's Terry Cable.

Red01 · « **Reply #5 on:** January 12, 2006, 07:57:46 PM »

Good to see I'm not the only one correcting his spelling.

Thief400 · « **Reply #6 on:** January 12, 2006, 10:07:55 PM »

Hey Jay what are you going back to school for AGAIN !!!!!!!!!
ROTFLMAO

gsxr400 racer · « **Reply #7 on:** January 12, 2006, 11:38:28 PM »

Hey enough from you three! Your all lucky i grace ya with my infinat knowledge !

And yo SNOW MAN whats up with what ya degreed yur cams to ,What lob centers! You know what im saying A!

tomacGTi · « **Reply #8 on:** January 13, 2006, 12:28:10 AM »

Jay, it's kind of funny, there's a guy with the same ham-fisted spelling as you in these VW forums I frequent. My God, you guys must have had the same ing-ga-rish teacher.

Maybe I'm getting used to it but someone should talk to babblefish for your asses...Ha!

-Randy

gsxr400 racer · « **Reply #9 on:** January 13, 2006, 12:36:03 AM »

Yes some people just know what you are saying,and others have nothing better to do than to pick on every miss spelled word! I take the time to answer not to check my grahmer! Im sure going to collage is gonna help a bit ,but I'm sure it will not change to much! As a Pharmacist I might have spell just a bit better! As a motorcycle mechanic it just wasnt that important! Cheers all you grahmer fookers!

magicGoose · « **Reply #10 on:** January 13, 2006, 12:27:24 PM »

Quote from: "Herr Tod"

Get some soldering skills and make your own

Hey Mr. Death! Good advice.

I have actually already shortened a set of cables, but I was hoping to find some OEM cables to put on the bike and keep my efforts to carry as spares. I may check out Terry Cable as Jay suggested and see what they have to say.
Thanks guys,
Steve

Thief400 · « **Reply #11 on:** January 13, 2006, 04:46:12 PM »

Sorry Jay just put the bike away, Wife got very sick so I had no time to tear into the motor this fall. but i did pick up a 2 step rev limiter and a wheel bar for racing next year. It's sledding time now. dailing in a new set of pipes and clutching changes.