Author Topic: what other swing arms can fit the B4? and tail mod (Read 4213 times)

ranakin400 · « **on:** March 08, 2006, 02:14:39 PM »

what other swing arms can fit the B4? this page has a few custom bikes with different swing arms

http://images.google.com/imgres?imgurl=http://www.banditmania.co.uk/images/400_bandit_cut_down_side.JPG&imgrefurl=http://www.banditmania.co.uk/bikes.htm&h=480&w=640&sz=91&tbnid=w2lGgHE21A4j0M:&tbnh=101&tbnw=135&hl=en&start=27&prev=/images%3Fq%3Dbandit%2B400%26start%3D20%26svnum%3D10%26hl%3Den%26lr%3D%26sa%3DN

I have a 2002 spare gsxr 1000 swingarm that i want to try and fit.

also there is this bike with the tail cut and shortened which i think looks awesome. is there a write up on that anywhere?

gsxr400 racer · « **Reply #1 on:** March 08, 2006, 09:48:47 PM »

Quote from: "ranakin400"

I have a 2002 spare gsxr 1000 swingarm that i want to try and fit.

?

I wouldnt go there , unless you got $500 dollars for machine work to have it line bored , spacers made and shortined. been there have that on my bike. look at 92 600-750-1100 stuff or gixxer 400 stuff or a sv for that mater.

ranakin400 · « **Reply #2 on:** March 08, 2006, 11:55:31 PM »

thanks. I wish there was an easier way to update the swingarm look

gsxr400 racer · « **Reply #3 on:** March 09, 2006, 12:24:51 AM »

check this bro this is what you want , this is what i have going on my bandit 400 with the srad 600 motor! you will need to find the linkage tho , this will bolt right on and used the same linkage dog bone geometry

http://cgi.ebay.com/ebaymotors/Suzuki-GSXR-GSX-R-1100-GSXR1100-Swingarm_W0QQcmdZViewItemQQcategoryZ35592QQitemZ4566064743QQrdZ1

gsxr400 racer · « **Reply #4 on:** March 09, 2006, 12:29:12 AM »

this year too http://cgi.ebay.co.uk/GSXR-750-L-SWING-ARM-1990-SUZUKI_W0QQitemZ8044484245QQcategoryZ10534QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

gsxr400 racer · « **Reply #5 on:** March 09, 2006, 12:30:59 AM »

this rgv fender fits http://cgi.ebay.co.uk/Suzuki-RGV250-RGV-250-front-mudguard_W0QQitemZ8043955707QQcategoryZ10534QQrdZ1QQcmdZViewItem

gsxr400 racer · « **Reply #6 on:** March 09, 2006, 12:31:55 AM »

these forks go right on http://cgi.ebay.co.uk/Suzuki-RGV250-RGV-250-forks-yolks_W0QQitemZ8043960586QQcategoryZ10534QQrdZ1QQcmdZViewItem

gsxr400 racer · « **Reply #7 on:** March 09, 2006, 12:38:03 AM »

this would be my choice for swingarms , but you could go about this differently if you lived in say the US and didnt want to pay shipping . Well some year 750 1100 old school suzuki had the same one same bracing. That would be my choice. http://cgi.ebay.co.uk/RGV250-RGV-VJ22-SWINGARM-BRACED_W0QQitemZ8045350445QQcategoryZ10534QQrdZ1QQcmdZViewItem

gsxr400 racer · « **Reply #8 on:** March 09, 2006, 12:40:07 AM »

Also i have found that a gixxer or srad subframe seem to go on a bandit 400 quite nicely. Have some one weld tabs for you then you just use the srad or newer plastic tail light ect...

doqq · « **Reply #9 on:** December 25, 2006, 06:56:34 PM »

will a 98 gsxr 600 swingarm work without having to machine it ?

gsxr400 racer · « **Reply #10 on:** December 25, 2006, 09:27:29 PM »

Not with out machining!