Author Topic: '01 GSF600S - Holeshot Stage 1 install  (Read 7333 times)

Offline sidefly

  • New user!
  • *
  • Posts: 2
'01 GSF600S - Holeshot Stage 1 install
« on: January 30, 2017, 03:51:41 PM »
Hello All!  New member here...

I have searched the forum pretty extensively to learn from past mistakes or learn tips.  However, I would really appreciate anyone chiming in to tell me specific gotchas to watch for.

By the way, I am keeping my stock exhaust but planning on the new jets, spacers, and timing advance. 

Is this going to be worth the trouble??? 

Thanks!
Sidefly

Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: '01 GSF600S - Holeshot Stage 1 install
« Reply #1 on: February 01, 2017, 11:35:11 AM »
You won't really notice much of a difference with the stock exhaust.  I ran my Stage 1 with the stocker for about 10 miles.  Switched to an aftermarket pipe and it really woke things up.  Gas mileage went way up too.  Personally, I'd be on the lookout for another pipe soon.

BTW - - -  :welcome: to the site
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline sidefly

  • New user!
  • *
  • Posts: 2
Re: '01 GSF600S - Holeshot Stage 1 install
« Reply #2 on: February 15, 2017, 01:40:08 PM »
I've got everything installed, and I even bought a Black Widow exhaust (300mm) from the euro maker.  Bike seems to run really well!