Author Topic: Fairing vibration !  (Read 3475 times)

Offline NomisQC

  • Board Homesteader!
  • ***
  • Posts: 54
Fairing vibration !
« on: June 05, 2008, 02:47:49 AM »
Hi !

I don't know if anyone has this problem but my fairing shakes a lot (up and down) while riding...

I looked for the problem and it seems to be the rubber spacer on the top bolt of the two bolts attaching the whole fairing to the frame...there is some play there...



I must admit that the roads suck here in Quebec but still... friends that I'm following always tell me it looks like I'm constantly flashing them with the high beam....

Anyone has noticed that ? I tried adding some tape around the nut and screwed it back but it did not change anything...

The play does not seem to be between the bolt and the spacer but between the spacer and the frame itself...

Perhaps I could change the spacer...

Any suggestions ?

Thanks !

« Last Edit: June 05, 2008, 02:54:31 AM by NomisQC »


Bandit 1200S 2004:
  • Leo Vince Evo II Slip-On
  • Stage 1 Jet Kit
  • Hayabusa Rear Shock
  • Rear Wheel Hugger
  • No fender + Rear Blinkers (LP)
  • LED Taillight
  • ProGrip 719 Gel Grips and ProGrip Tank Pad
  • Race Tech Front Springs (Upcoming)
  • Stainless lines (Upcoming)

Offline Cruisecontrol

  • Board Homesteader!
  • ***
  • Posts: 203
Re: Fairing vibration !
« Reply #1 on: June 05, 2008, 04:08:08 AM »
Take it off and throw it away. 

It will look much better and solve the vibration issue all at once.  :thumb:

Offline NomisQC

  • Board Homesteader!
  • ***
  • Posts: 54
Re: Fairing vibration !
« Reply #2 on: June 05, 2008, 06:46:37 AM »
Great idea except...I do love the look of the fairing plus...waht about mirrors ? headlights ? flashers ?


Bandit 1200S 2004:
  • Leo Vince Evo II Slip-On
  • Stage 1 Jet Kit
  • Hayabusa Rear Shock
  • Rear Wheel Hugger
  • No fender + Rear Blinkers (LP)
  • LED Taillight
  • ProGrip 719 Gel Grips and ProGrip Tank Pad
  • Race Tech Front Springs (Upcoming)
  • Stainless lines (Upcoming)

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: Fairing vibration !
« Reply #3 on: June 05, 2008, 10:20:30 AM »
Sounds like what you are describing is typical of the S model Bandits of all generations.  :shrug:
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: Fairing vibration !
« Reply #4 on: June 05, 2008, 11:38:55 AM »
Perhaps I could change the spacer...

That part (rubber spacer) is available separately...  often times the bolt assembly has loosened (too many wheelies..  :trustme:) and can be re-torqued to spec.
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline NomisQC

  • Board Homesteader!
  • ***
  • Posts: 54
Re: Fairing vibration !
« Reply #5 on: June 05, 2008, 05:22:52 PM »
Thanks but I already tried to retorque the bolt to specs...didn't improve the situation...

As I said it really seems as if the spacer itself shrunk or something...


Bandit 1200S 2004:
  • Leo Vince Evo II Slip-On
  • Stage 1 Jet Kit
  • Hayabusa Rear Shock
  • Rear Wheel Hugger
  • No fender + Rear Blinkers (LP)
  • LED Taillight
  • ProGrip 719 Gel Grips and ProGrip Tank Pad
  • Race Tech Front Springs (Upcoming)
  • Stainless lines (Upcoming)

Offline Barbarian

  • Board Homesteader!
  • ***
  • Posts: 287
    • http://www.straightdope.com
Re: Fairing vibration !
« Reply #6 on: June 05, 2008, 08:11:04 PM »
I've got no problems with mine -- maybe something fell off yours or wasn't installed in the first place?

If you want to swing by for comparison's sake, send me a PM.
2006 650 Bandit S w/ABS