Author Topic: Anyone running RS38 Mikuni's on a B12. (Read 5325 times)

2005B12S · « **on:** June 26, 2005, 01:58:01 AM »

Thinking of going with RS38's and aftermarket cams. Any users out there?

Bob Holland · « **Reply #1 on:** June 30, 2005, 11:50:19 AM »

I am running RS flatslides and Cammotion G21 cams with a J&E 1246 piston kit. 98 Bandit

2005B12S · « **Reply #2 on:** July 03, 2005, 11:54:19 PM »

How do the 38's work? Did you lose any streetability?

Are the G21's .380 lift and are you running stock valve guides?

I was thinking of running the 38's with .330 lift cams and stock displacement and compression. Any imput greatly appreciated.

Thanks, ed
2005 GSF1200SZ
1983 GS750ED

2005B12S · « **Reply #3 on:** July 04, 2005, 11:05:18 AM »

Also, are you using the stock fuel valve or a Pingel?

Thanks.

Bob Holland · « **Reply #4 on:** July 04, 2005, 11:16:51 AM »

The throttle is stiffer than stock carbs, takes getting use to. I am rumming APE short valve guides with over sized valves.
I don't think that the carbs will do much with stock engine, but the cams may help some. I ran a 1989 gsxr with 1216 cc, 13 to 1 kit with 36 mm carbs with jet kit, and ran 9.60 at 135 mph, a few years ago.