« previous next »
Pages: [1]

Author Topic: spark plug connector  (Read 2699 times)

Offline asskickinpeanuts

  • Board Homesteader!
  • ***
  • Posts: 54
spark plug connector
« on: August 11, 2009, 04:24:26 AM »
FYI.  My last bandit (a 1998 1200) had an intermittent misfire :banghead:.  I finally found the cause.  It seems the "clip"(for lack of a better term) inside one of the spark plug connector boots broke.  So it was not making solid contact with that plug.  Hence an intermittent lack of spark at the plug, causing the misfire.  And the plug wires are molded to the coil.  So you can't change just the boot (that I know of :banghead:) so the whole coil needs replacing.  YMMV
Logged
2001 Bandit 1200S
the sum intelligence of humanity is a fixed quantity.  The greater number of people, the less intelligence per person (and I resemble this remark).
If it's too loud, you're too old.

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: spark plug connector
« Reply #1 on: August 11, 2009, 12:46:54 PM »
The wire is molded to the coil, but IIRC, the plug end is just screwed into the coil wire and can be replaced.  If not, you could still cut the OE plug cap off and get a screw-on type to replace it.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)
Pages: [1]
« previous next »