Author Topic: Clip ons?  (Read 5020 times)

Offline Batdad

  • TURBO TYPER!
  • **
  • Posts: 22
Clip ons?
« on: March 28, 2005, 03:18:43 AM »
Anyone toss a set onto their B6 ? how did it work out ???
Its no longer slammed its getting overhauled.

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Clip ons?
« Reply #1 on: March 28, 2005, 05:58:36 AM »
I don't know anyone who has, but I do know you can go with drag bars.
Bobcat had 'em on his 1G B6 and has 'em on his 2G B12.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline aussiebandit

  • Board Homesteader!
  • ***
  • Posts: 1872
Clip ons?
« Reply #2 on: March 28, 2005, 06:09:53 AM »
I would have thought putting clip ons on to a Bandit was kind of defeating the purpose of the bike - each to their own I suppose.

Try these web sites - they may have something that could work.

http://www.bikebiz.com.au/shop/enter.html

http://www.amcmotorcycles.com/
AUSSIEBANDIT (MICK)
02B12

"Nothing is foolproof to a sufficiently talented fool"

Offline dsartwell1

  • Board Homesteader!
  • ***
  • Posts: 206
Maybe another option
« Reply #3 on: March 28, 2005, 06:08:24 PM »
I was thinking of going to clipons as well. I got a tip to check out Suburban Machinery. They have a bar that would bolt into the stock clamps but yeild a lower and forward position. Bars look really good. I have e-mailed them twice and tried to call several times but still haven't talked to anyone. The bar is made for the SV650 but says it will also fit a new model GS500. The bar should work but I can't get them to return my inquiry. If I ever do talk to them I'll post it up.

Offline rangerracer351

  • TURBO TYPER!
  • **
  • Posts: 42
clipons
« Reply #4 on: May 28, 2005, 02:43:07 PM »

Offline Bob Holland

  • Board Homesteader!
  • ***
  • Posts: 510
Clip ons?
« Reply #5 on: May 31, 2005, 10:00:50 PM »
I put clip ons on my 98 1200, they hit the fairing no matter how I ajusted them. I gave them to a friend for his ZRX 12.
If I didn't have a Suzuki, I would have a Kawasaki

Offline 2005B12S

  • Board Homesteader!
  • ***
  • Posts: 314
Clip ons?
« Reply #6 on: June 04, 2005, 11:47:57 AM »
Just bought a 2005 B12, When I got home from the dealer I ordered Pro Tek 43mm clip-ons as I hated the big wide stock bar. I raised the fork tubes 1.5in in the triples and installed them above the top triple. They fit perfectly with only lock to lock clearance being a little tight on the levers clearing the faring. Bar to tank clearance is fine. The bike handles much better, steers quicker and has a sporty but not uncomfortable riding position. Photo link below. Highly recommened overall. Good Luck, Ed.

2005 GSF1200SZ
1983 GS750ED


http://groups.msn.com/SuzukiGSGarage/gs750edbacktolife.msnw?action=ShowPhoto&PhotoID=5148
2005 GSF1200SZ
1983 GS750ED
1992 900SS

"The quality of the kite matters little, sucess depends upon the man sitting in it" Manfred Von Richthofen