« previous next »
Pages: [1]

Author Topic: Bandit Pair system removal.  (Read 3832 times)

Offline HWal

  • New user!
  • *
  • Posts: 8
Bandit Pair system removal.
« on: March 26, 2008, 03:40:07 PM »
With a bit of moral doubt I have decided to remove the PAIR system on my Bandit 1200, and cover the four holes on the cylinder block. Mostly because the system adds some unwanted parts (and weight) under the tank and in front of the engine.

Does anyone know if any rejetting or adjustments need to be done due to the PAIR removal?

Thanks,
Helge.
Logged

Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980
Re: Bandit Pair system removal.
« Reply #1 on: March 26, 2008, 03:51:13 PM »
No adjustments are necessary after removal... but be sure to cover or cap the resultant vacuum & airbox holes after you remove it.
Logged

Pages: [1]
« previous next »