Author Topic: B12 Problem - possibly carbs.  (Read 6401 times)

Offline ptitza

  • TURBO TYPER!
  • **
  • Posts: 26
B12 Problem - possibly carbs.
« Reply #15 on: February 01, 2006, 03:38:55 PM »
Well.
I`ve cleaned the plugs.
No help.

Offline solman

  • Board Homesteader!
  • ***
  • Posts: 1180
B12 Problem - possibly carbs.
« Reply #16 on: February 02, 2006, 07:16:59 AM »
Quote from: "ptitza"
Well.
I`ve cleaned the plugs.
No help.


Cleaning isn't always going to fix it.  I would buy a new set that you way there is no question.
03 Naked Bandit 1200 <br />Vitamin B12, its great for the soul!

Offline ptitza

  • TURBO TYPER!
  • **
  • Posts: 26
B12 Problem - possibly carbs.
« Reply #17 on: February 02, 2006, 08:39:07 AM »
Quote from: "solman"
Quote from: "ptitza"
Well.
I`ve cleaned the plugs.
No help.


Cleaning isn't always going to fix it.  I would buy a new set that you way there is no question.


I agree. The only problem here is that there is no plugs for Bandit in stock at the local motorcycle shop until sunday.
Anyway, I`ll try my old set of plugs - they were ok when I replaced them.

Offline ptitza

  • TURBO TYPER!
  • **
  • Posts: 26
B12 Problem - possibly carbs.
« Reply #18 on: February 04, 2006, 07:06:16 AM »
Carbs that was.

Offline ptitza

  • TURBO TYPER!
  • **
  • Posts: 26
B12 Problem - possibly carbs.
« Reply #19 on: February 05, 2006, 10:10:15 AM »
I`ve decided to test the TPS at the same occasion, and I`ve found that it's dead:-/

Offline rider123

  • Board Homesteader!
  • ***
  • Posts: 991
B12 Problem - possibly carbs.
« Reply #20 on: February 06, 2006, 02:25:37 PM »
You mean nothing? No Ohm reading at all? Try running it disconnected I read somewhere that some people do this.
2005 Bandit 1200, Modified Holeshot Stage 1 with 17.5 pilots 2.75 turns out, and 110 mains 5 shims. Muzzy Slip on w/mid-pipe, stock filter. 1.5" hole in the airbox lid.

Offline ptitza

  • TURBO TYPER!
  • **
  • Posts: 26
B12 Problem - possibly carbs.
« Reply #21 on: February 08, 2006, 04:44:41 AM »
Quote from: "rider123"
You mean nothing? No Ohm reading at all? Try running it disconnected I read somewhere that some people do this.


No reading.
Running it connected or disconnected doesn't seems to matter.