« previous next »
Pages: [1]

Author Topic: 2001 Bandit 1200 axel nut  (Read 4240 times)

Offline Nick2k

  • TURBO TYPER!
  • **
  • Posts: 33
2001 Bandit 1200 axel nut
« on: September 18, 2006, 05:44:41 PM »
It's time for me to adjust my chain, but I'm having a heck of a time loosening the axel nut. I can't get it to budge!

I just want to make sure that this nut doesn't thread backwards or something...I'd hate to be tightening it!

Lefty loosey, righty tighty?
Logged
2008 Kawasaki ZX-14

Offline 2005B12S

  • Board Homesteader!
  • ***
  • Posts: 314
2001 Bandit 1200 axel nut
« Reply #1 on: September 18, 2006, 05:56:15 PM »
That is correct, it probably has about 70ft-lbs or more on it so its gonna take a tug to break it free.

Use a good 6pt socket and breaker bar to do the job.

Good Luck, Ed
Logged
2005 GSF1200SZ
1983 GS750ED
1992 900SS

"The quality of the kite matters little, sucess depends upon the man sitting in it" Manfred Von Richthofen

Offline jeepskate99

  • Board Homesteader!
  • ***
  • Posts: 236
2001 Bandit 1200 axel nut
« Reply #2 on: September 18, 2006, 08:37:10 PM »
Quote from: 2005B12S
That is correct, it probably has about 70ft-lbs or more on it so its gonna take a tug to break it free.

Use a good 6pt socket and breaker bar to do the job.

Good Luck, Ed


I regularly take minne off with the tools that came with the bike.   I have the "right" tools but they are in the basement and I don't want to get them.  Just use the cheapo wrench and the extension.  Put it on going toward the front of the bike and use your foot to step on it.
Logged
There are no stupid questions,  only stupid people asking questions!

Offline ant_129

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 267
2001 Bandit 1200 axel nut
« Reply #3 on: September 18, 2006, 11:49:58 PM »
I had the same problem not too long ago.  The breaker bar and socket did the trick with little bit of my body weight.
Logged
02 Bandit 1200S
Holeshot 21" slipon
Holeshot Stage 1 jet kit
Givi engine guards

Offline Dundee

  • Board Homesteader!
  • ***
  • Posts: 59
2001 Bandit 1200 axel nut
« Reply #4 on: September 19, 2006, 04:21:15 AM »
some doofus (at the dealer no less) had tightened mine with an impact gun. Even my mechanic had to have a couple of goes at it :duh:
Logged
Mick
2001 GSF1200S

Offline snofrog

  • Board Homesteader!
  • ***
  • Posts: 346
2001 Bandit 1200 axel nut
« Reply #5 on: September 19, 2006, 05:59:34 AM »
make sure you push down ,not pull up
Logged
oo b12 s
thank`s Ivan
z/g smoke sr
yosh ss can
crg bar end mirrors

Offline Nick2k

  • TURBO TYPER!
  • **
  • Posts: 33
2001 Bandit 1200 axel nut
« Reply #6 on: September 20, 2006, 01:12:31 AM »
Got it off...really had to put some nurtz into it though.

It sure is a lot easier to adjust the chain on my wife 1996 600cc than my 2001 1200s!
Logged
2008 Kawasaki ZX-14

Offline timjim

  • TURBO TYPER!
  • **
  • Posts: 25
axle nut
« Reply #7 on: October 01, 2006, 03:09:05 PM »
should be 110 nm..think the term "ft"should be removed from common language! :motorsmile:
Logged

Offline timjim

  • TURBO TYPER!
  • **
  • Posts: 25
axle nut
« Reply #8 on: October 01, 2006, 03:10:33 PM »
when i say"ft"..i mean the mechanics best friend"f***ing tight",hope i didnt confuse too many people then!?!? :duh:
Logged
Pages: [1]
« previous next »