Author Topic: Possible engine swap questions (Read 2380 times)

fast50ranger · « **on:** October 04, 2005, 11:45:18 AM »

I have a 1986 GSXR 750 motor that I need to do something with. I was wondering if this would be a good swap for my Bandit 600? And if so what are the steps involved in swapping motors? Will the 750 have more power than my 600?

fast50ranger · « **Reply #1 on:** October 04, 2005, 04:37:29 PM »

anybody???

2005B12S · « **Reply #2 on:** October 04, 2005, 08:08:50 PM »

Power is easy, the 750 is gonna be stronger everywhere. It should be a pretty good match. The B6 suspension and wheels are better/stronger than the early 86-87 GSXR pieces and should handle the power. As far as fitiment, its guess work. There are a few 7/11 sites that go into detail on fitting a GSXR1100 motor into the 750 frame. There might be useful info there.

Expect unforseen problems, but I am sure it can be done.

Good Luck, Ed.
2005 GSF1200SZ
1983 GS750ED

Red01 · « **Reply #3 on:** October 04, 2005, 09:25:48 PM »

It's a bolt-in swap. They are externally the same. Same mount locations, height, width, etc. GSXR & Katana 750's have been swapped by a few folks here.

Here's a couple threads to check out:

http://forums.banditalley.net/viewtopic.php?t=1564&highlight=750

http://forums.banditalley.net/viewtopic.php?t=587&highlight=750

fast50ranger · « **Reply #4 on:** October 04, 2005, 09:47:17 PM »

Thanks for the replies.