* *

Author Topic: o ring number 11143-32f00  (Read 581 times)

Offline EvilRanger

  • New user!
  • *
  • Posts: 3
o ring number 11143-32f00
« on: November 14, 2017, 05:10:28 PM »
Hello all, I am reinstalling my head and am in need of some info. I am replacing the 6 head o rings part # 11143-32F00. I have looked all over and cannot find specifications for this part. Does anyone have these specs? Thanks. Basically I am cheap and would like to source them elsewhere than Suzuki.

Offline ventYl

  • Board Homesteader!
  • ***
  • Posts: 247
Re: o ring number 11143-32f00
« Reply #1 on: November 18, 2017, 06:25:06 AM »
AFAIK Suzuki does not provide official specifications for their O-ring sizes. You have to go with trial-error method if it is feasible for your case. I did it with carbs because these are fairly easilly accessible. You only can tell for sure that they use metric sizes.
Bandit 400 1991 - stock except of swap from GK75B to GK75A

Offline China Greg

  • Board Homesteader!
  • ***
  • Posts: 194
  • Tighten it 'til it Loosens then back-off 1/4 turn
Re: o ring number 11143-32f00
« Reply #2 on: December 05, 2017, 09:34:55 AM »
Those six "O-rings" are actually GASKETS... they are (slightly) cylindrical in shape and have a steel core.
I'm not sure why you would want to find after-market parts to match... why not just use the OEMs? They're about $4 each... not exactly KILLER for a head tear-down budget I'd say.

It's interesting that when installing a big-bore piston kit (JE/Wiseco), you're not SUPPOSED to use those gasket things. I actually did use them the first time I installed a bore kit on my B12... found out later (after some leaking) that the Cometic steel head gasket doesn't use those.
Black '98 B12S, JE 1216cc bore kit, port work, Yosh RS3, Ivan jetting, drag bars, modified Corbin Gunfighter, Hyperpro shock, Racetech Gold valve kit, stainless lines, Wave rotors, polished wheels, fender eliminator, bar-end mirrors, NEP throttle lock, Adaptiv TPX radar detector...140K miles

Offline EvilRanger

  • New user!
  • *
  • Posts: 3
Re: o ring number 11143-32f00
« Reply #3 on: December 28, 2017, 06:34:18 PM »
I ended up buying them from Suzuki. I thought if they were standard o rings I could match them up. I ordered one and it was easy to tell they were non standard. Thanks guys

Offline China Greg

  • Board Homesteader!
  • ***
  • Posts: 194
  • Tighten it 'til it Loosens then back-off 1/4 turn
Re: o ring number 11143-32f00
« Reply #4 on: December 28, 2017, 06:41:16 PM »
Yo, Evil, let us know how the project turns out.

Don't forget:

CLEAN ..CLEAN...CLEAN...!
Black '98 B12S, JE 1216cc bore kit, port work, Yosh RS3, Ivan jetting, drag bars, modified Corbin Gunfighter, Hyperpro shock, Racetech Gold valve kit, stainless lines, Wave rotors, polished wheels, fender eliminator, bar-end mirrors, NEP throttle lock, Adaptiv TPX radar detector...140K miles

 

Sponsorship

Ad

Facebook

Welcome, Guest. Please login or register.
April 25, 2018, 09:21:57 AM

Login with username, password and session length

Recent