Author Topic: speedo/tach light no worky (Read 3435 times)

El Bandito · « **on:** May 26, 2006, 11:36:32 PM »

so suddenly my speedo, tach, and fuel gauge lights aren't working..
all the fuses are fine, i tried to check connections but can't really tell wtf is going on in that rat's nest of a wiring harness up front..

any ideas anyone?

El Bandito · « **Reply #1 on:** May 29, 2006, 11:41:06 PM »

i guess my system of checking speed when i go under streetlights will have to suffice for a while..

Seanybiker · « **Reply #2 on:** May 29, 2006, 11:59:57 PM »

if the wiring fine would ya not check the bulb????? not trying to be smart but I made a few mistakes before and it is always the little things that you forget to check.

Vee Dub Nut · « **Reply #3 on:** May 30, 2006, 03:53:23 PM »

check the grey wire in that nest.. there should be several, one from each of the gauges and from the indicators. Suzuki for some reason put something like 5 wires into one butt connector.

El Bandito · « **Reply #4 on:** June 02, 2006, 01:35:03 PM »

i got in there and did some testing with the grey wires and grounds..
there's some weird shit going on up there!

it's really strange, i can get the fuel gauge light to come on my jumping the ground direct to the frame and jumping the grey wire direcly to the blue connector in the fairing.. but only the fuel gauge light..

then, if i jump one of the grey wires from either the speedo or tach directly to the blue connector and the ground to the frame, i can get both the speedo and tach to light up.. but not the fuel gauge..

seems stupid to have run them separate.. i guess if it comes down to it, i'll just end up running a bunch of jump wires and call it a day..

chevsuz12 · « **Reply #5 on:** June 02, 2006, 02:59:36 PM »

my b12 did the same, about 6 inches up the harness from the connector I found that the infamous gray wire had basically rotted away! cut out the bad area and soldered in new wires, problem solved.