« previous next »
Pages: [1]

Author Topic: white gauge faceplates  (Read 3305 times)

Offline BanditAllan

  • Board Homesteader!
  • ***
  • Posts: 56
white gauge faceplates
« on: March 09, 2008, 11:48:13 AM »
Does anyone have a link to or knows who makes the white faced gauge plates to fit the pre Y2K Bandit 1200.
Logged

Offline China Greg

  • Board Homesteader!
  • ***
  • Posts: 194
  • Tighten it 'til it Loosens then back-off 1/4 turn
Re: white gauge faceplates
« Reply #1 on: March 11, 2008, 10:06:46 PM »
How would you CHANGE them, if you could find them?
As far as I know, those glass faceplates don't come off.
Logged
Black '98 B12S, JE 1216cc bore kit, port work, Yosh RS3, Ivan jetting, drag bars, modified Corbin Gunfighter, Hyperpro shock, Racetech Gold valve kit, stainless lines, Wave rotors, polished wheels, fender eliminator, bar-end mirrors, NEP throttle lock, Adaptiv TPX radar detector...140K miles

Offline BanditAllan

  • Board Homesteader!
  • ***
  • Posts: 56
Re: white gauge faceplates
« Reply #2 on: March 11, 2008, 10:24:24 PM »
The units are opened from the back after you take the chrome housing caps off.
I saw the face plates offered by a seller in France but they were in kmh for the speedo.
Logged

Offline NomisQC

  • Board Homesteader!
  • ***
  • Posts: 54
Re: white gauge faceplates
« Reply #3 on: April 18, 2008, 03:02:52 PM »
I also only saw them in Kmph....the guy says he can change the "Bandit 1200 S" text for "Bandit 1200 N"....perhaps he can change the Kph for Mph ???

I think it's worth asking...

There you go:

http://cgi.ebay.ca/Fond-de-compteur-1200-Bandit-1996-1997-1998-suzuki_W0QQitemZ260229146481QQihZ016QQcategoryZ73785QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Logged


Bandit 1200S 2004:
  • Leo Vince Evo II Slip-On
  • Stage 1 Jet Kit
  • Hayabusa Rear Shock
  • Rear Wheel Hugger
  • No fender + Rear Blinkers (LP)
  • LED Taillight
  • ProGrip 719 Gel Grips and ProGrip Tank Pad
  • Race Tech Front Springs (Upcoming)
  • Stainless lines (Upcoming)

Offline Daytona

  • Board Homesteader!
  • ***
  • Posts: 1063
Re: white gauge faceplates
« Reply #4 on: April 21, 2008, 08:30:41 PM »
U mean like these?
Logged

Offline Daytona

  • Board Homesteader!
  • ***
  • Posts: 1063
Re: white gauge faceplates
« Reply #5 on: April 21, 2008, 08:48:52 PM »
These folk will make em up if they get a few requests for em!
http://stores.ebay.com/CruiserBackrest
Logged

Offline BanditAllan

  • Board Homesteader!
  • ***
  • Posts: 56
Re: white gauge faceplates
« Reply #6 on: April 22, 2008, 10:37:30 AM »
The guy in france only does km/h and doesnt have mp/h. Plus his are paper and i want the real thing not pieces of paper placed inside the unit on top of the original plate.
Thanks for the info but how or whos going to generate enough requests to get a quantity to make it worth having some of those done.
Logged

Offline Daytona

  • Board Homesteader!
  • ***
  • Posts: 1063
Re: white gauge faceplates
« Reply #7 on: April 22, 2008, 08:26:51 PM »
Quote from: BanditAllan on April 22, 2008, 10:37:30 AM
The guy in france only does km/h and doesnt have mp/h. Plus his are paper and i want the real thing not pieces of paper placed inside the unit on top of the original plate.
Thanks for the info but how or whos going to generate enough requests to get a quantity to make it worth having some of those done.
Well never know until you try! They aren't a big deal to make when you have the CNC sytem! Like the Busa, the program was sent from Australia called a flip system which uses KMh & MPh.
Logged

Offline K1958

  • New user!
  • *
  • Posts: 6
Re: white gauge faceplates
« Reply #8 on: April 22, 2008, 10:15:20 PM »
you could also try these guys:

http://www.bluegauges.com

Logged
Pages: [1]
« previous next »