« previous next »
Pages: [1]

Author Topic: Renntec:  (Read 6658 times)

Offline Oldbutslow

  • TURBO TYPER!
  • **
  • Posts: 24
Renntec:
« on: September 28, 2009, 09:37:38 PM »
Guys:  Have any of you Bandit 12/12.5 owners installed a Renntec tail rack on your bike? Thanks, BK

           http://www.renntec.co.uk/suzuki_gsf1250_bandit_sports_rack_carrier
« Last Edit: September 28, 2009, 09:39:25 PM by Oldbutslow »
Logged
'07 B1250, '09 TU250X, '01 KE100

Offline wizzobeer

  • Board Homesteader!
  • ***
  • Posts: 139
Re: Renntec:
« Reply #1 on: September 28, 2009, 10:56:05 PM »
I have one on my 06 and it is slick. Same body style as the newer bandits.
Logged

Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: Renntec:
« Reply #2 on: September 28, 2009, 10:59:35 PM »
Yup.... count me in.  Very nice rack for sure.  The expandable tail-pack is a nice touch but EXTREMELY pricey for what you get.  I just replaced my tail pack (sun-faded and torn) and they've redesigned it (poorly) but I modified it to work like it should have been.

Got mine from here....

http://www.revsperformance.com/renntec/sports_racks.htm

Good customer service...  shipping and handling was on the high side.

All in all I give the whole set-up (rack and pack) a 9 out of 10.
Logged
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline Oldbutslow

  • TURBO TYPER!
  • **
  • Posts: 24
Re: Renntec:
« Reply #3 on: September 30, 2009, 05:09:09 PM »
It looks like I have another trincket to buy!   Thanks Guys!    ,BK
« Last Edit: October 01, 2009, 10:40:35 PM by Oldbutslow »
Logged
'07 B1250, '09 TU250X, '01 KE100

Offline asskickinpeanuts

  • Board Homesteader!
  • ***
  • Posts: 54
Re: Renntec:
« Reply #4 on: October 01, 2009, 01:25:28 AM »
Quote from: Oldbutslow on September 28, 2009, 09:37:38 PM
Guys:  Have any of you Bandit 12/12.5 owners installed a Renntec tail rack on your bike? Thanks, BK

           http://www.renntec.co.uk/suzuki_gsf1250_bandit_sports_rack_carrier
Nope.  I'm gonna make one.  And if it turns out OK, then I'll figure out a way to mount my plastic ammo cans from my bulk ammo purchases from Cabelas for saddlebags.  (Rather get some Givi, but I can't $$$ right now).
Logged
2001 Bandit 1200S
the sum intelligence of humanity is a fixed quantity.  The greater number of people, the less intelligence per person (and I resemble this remark).
If it's too loud, you're too old.

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: Renntec:
« Reply #5 on: October 04, 2009, 12:28:55 PM »
One word of caution, luggage racks that attach like this one are not good for carrying much weight (~10 lbs max) - at least on the 2G bikes.  I assume the structure the grab rail mounts to on the 3G & 4G is similar, but I've never seen it.  The leverage of much weight on mounting points so close together leads to cracking the structure under the cosmetics.

If you need something capable of carrying more than 10 lbs, a rack with mount points spead further apart is better.  One such rack is Ventura's:
http://www.ventura-bike.com/fitments.aspx?modelid=687 (This link is for a 2G 600 - because they have pictures, their others are similar, but no pics on the site.)
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline asskickinpeanuts

  • Board Homesteader!
  • ***
  • Posts: 54
Re: Renntec:
« Reply #6 on: October 08, 2009, 03:24:31 AM »
Quote from: Red01 on October 04, 2009, 12:28:55 PM
One word of caution, luggage racks that attach like this one are not good for carrying much weight (~10 lbs max) - at least on the 2G bikes.  I assume the structure the grab rail mounts to on the 3G & 4G is similar, but I've never seen it.  The leverage of much weight on mounting points so close together leads to cracking the structure under the cosmetics.

If you need something capable of carrying more than 10 lbs, a rack with mount points spead further apart is better.  One such rack is Ventura's:
http://www.ventura-bike.com/fitments.aspx?modelid=687 (This link is for a 2G 600 - because they have pictures, their others are similar, but no pics on the site.)

I was going to disagree, but, I drew a static force diagram.  By golly, now I think you are right!   Where did you get this information from?

Also, I had the tail cowling off.  The rear two bolt bosses are attached on either end a bracket that is in turn welded the full length (about 2-3"?) to the frame tubes.  So the grab rail attachments might be stronger than it seems.
Logged
2001 Bandit 1200S
the sum intelligence of humanity is a fixed quantity.  The greater number of people, the less intelligence per person (and I resemble this remark).
If it's too loud, you're too old.

Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: Renntec:
« Reply #7 on: October 08, 2009, 10:07:37 AM »
Quote from: asskickinpeanuts on October 08, 2009, 03:24:31 AM
 Where did you get this information from?


The load limit is listed on the rack's installation instructions too.   Still, assuming you're not mounting a topbox or similar it's a great little rack with clean lines.
Logged
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline Snubnose

  • Board Homesteader!
  • ***
  • Posts: 398
  • Cos For why?
Re: Renntec:
« Reply #8 on: October 08, 2009, 02:37:16 PM »
Quote from: Red01 on October 04, 2009, 12:28:55 PM
One word of caution, luggage racks that attach like this one are not good for carrying much weight (~10 lbs max)

I would absolutely concurr...

Top Rack Weak Point.

Pics below of the damage you can get with this kind of rack if your not careful...




« Last Edit: October 08, 2009, 02:47:15 PM by Snubnose »
Logged
SNUBNOSE, Alberta, Canada
2003 B12S - Silver
Stock 06' pipe
3 shims on each needle
Zero gravity SR
Sw Motech rear rack - V46 Top case
PAIR Block off Kit
Salamander Bar Ends
007 special license plate feature ;)

We are not what we think we are, We are not what others think, but rather, we are what we think others think we are!

Offline asskickinpeanuts

  • Board Homesteader!
  • ***
  • Posts: 54
Re: Renntec:
« Reply #9 on: October 09, 2009, 12:06:55 AM »
Thanks for the pictures showing the failure.  I would have thought the bracket for the grab rail bosses would not break that easily.   :yikes:Thanks again.
Logged
2001 Bandit 1200S
the sum intelligence of humanity is a fixed quantity.  The greater number of people, the less intelligence per person (and I resemble this remark).
If it's too loud, you're too old.

Offline Oldbutslow

  • TURBO TYPER!
  • **
  • Posts: 24
Re: Renntec:
« Reply #10 on: October 09, 2009, 12:37:12 AM »
Those pictures are of a B12...? I checked my bike and it looks to have some substantial metal support by way of the subframe. Good thought about not loading it up to the gills, though.     ,BK
Logged
'07 B1250, '09 TU250X, '01 KE100
Pages: [1]
« previous next »