Author Topic: Ever try this type of Balance? (Read 2586 times)

03banditrdr · « **on:** May 12, 2007, 12:30:59 AM »

http://www.innovativebalancing.com/index.html

Quote

The way we do this is by offering a Dynamic Balancing Solution, a high-density ceramic bead that, when easily installed, continuously balances your tires as you drive. The amount of material will distribute itself in weight and position dependent on the balance requirements of the individual tire.

The result is a smooth, vibration-free ride, derived from our balancing media that is always repositioning itself as the tire wears. If you own a pickup truck, commercial truck, motorhome, RV, tractor trailer, motorcycle, or similar vehicle, and want to get rid of those wheel vibration and tire cupping problems, then you need to move up to Dyna Beads

Im going to try it.!! I just got the Shinko 009's mounted so now is the time.

CWO4GUNNER · « **Reply #1 on:** May 12, 2007, 12:42:22 AM »

03banditrdr · « **Reply #2 on:** May 17, 2007, 12:32:53 AM »

well so far so good. the are quite smooth all the way to 120.
didnt try it any faster than that.

Daytona · « **Reply #3 on:** May 27, 2007, 06:55:06 PM »

If you found the heavy part of your wheel (which isn't always the stem area) and then put the yellow light spot (dot) of the tire by it you don't need anymore to balance a Shinko 009 anyway! I'm about to install my 4th 009 rear on my Busa in est 3k more miles. 2nd on it and 2 rears on my Bandit 1200 with one front. Took all the lead off the wheel, found the heavy part of the wheel and never had a bit of vibs! Tested to 160 smooth all the way from nubs to bald! It has almost 5k on it at this point.