Author Topic: clip ons ? (Read 10202 times)

Batdad · « **on:** March 26, 2005, 06:35:59 PM »

I want to swap to clip ons .. just need to know what the correct size for my 01 forks?

Red01 · « **Reply #1 on:** March 28, 2005, 05:36:49 AM »

B6 is 41mm
B12 is 43 mm

Be sure you have tank clearance!

B12Teuton · « **Reply #2 on:** March 28, 2005, 12:00:48 PM »

I read somewhere that the bigger problem is clearing the fairing on S models.

I assume it depends on the clipons, but it may not work.

rangerracer351 · « **Reply #3 on:** March 30, 2005, 03:30:57 PM »

i changed to clipons and love it .clearence is not a problem at the fairing i got clamps and upper tree from a katana(that doesnt work without the lower)all i used from them was the fork clamps. my bike is a 99 b6.i love the new look and riding position

B12Teuton · « **Reply #4 on:** March 31, 2005, 12:12:26 PM »

post some pictures if you can.
I'm sure many people will be interested.

rangerracer351 · « **Reply #5 on:** April 05, 2005, 04:22:24 PM »

http://bikepics.com/members/rangerracer351/

work in progress .if it doesnt load just hit refresh

Red01 · « **Reply #6 on:** April 05, 2005, 07:54:15 PM »

Click on rangerracer's link if you wanna see any details that don't show up in the smaller version below. The bikepics version is huge (2048 x 1536 pixels).

Twardc · « **Reply #7 on:** August 23, 2005, 04:13:53 PM »

sup fellas so wher would one find these clip ons for a 2001 B12S. I think that I would like to try the new position and look
Thanks
Live to ride, ride to eat!

Red01 · « **Reply #8 on:** August 23, 2005, 06:59:17 PM »

Several aftermarket vendors (Vortex comes quickly to mind), or any bike that came with clipons and has 43mm forks.

MrBAMcClain · « **Reply #9 on:** August 23, 2005, 10:06:21 PM »

clicky>>>

Red01 · « **Reply #10 on:** August 24, 2005, 12:03:05 AM »

There's another ebay set here.

But the Blackbird ones in the post above are a better deal price wise and would sit a little higher for better fairing and tank clearance.

gearset01 · « **Reply #11 on:** August 24, 2005, 05:49:26 PM »

Ive looked at the pictures and I think they fasten to the forks.
But at the risk of looking stupid, what are they and what do they do.
Pin

Red01 · « **Reply #12 on:** August 24, 2005, 07:51:24 PM »

They replace the tubular handlebars with bars that "clip on" to the fork tubes instead... the standard fare of the repli-racer bikes as well as many SPORT-tourers.

2005B12S · « **Reply #13 on:** August 24, 2005, 09:34:10 PM »

Pro Tek 43mm clip-ons on my '05 B12S. Absolutely love them, they were on the bike before it hit 50 miles as I hated the stock bar.

Ride On, Ed
2005 GSF1200SZ
1983 GS750ED

http://groups.msn.com/SuzukiGSGarage/gs750edbacktolife.msnw?action=ShowPhoto&PhotoID=5148

http://groups.msn.com/SuzukiGSGarage/gs750edbacktolife.msnw?action=ShowPhoto&PhotoID=5209

http://groups.msn.com/SuzukiGSGarage/gs750edbacktolife.msnw?action=ShowPhoto&PhotoID=5210

Red01 · « **Reply #14 on:** August 24, 2005, 10:22:29 PM »

Those Pro Tek's look very nice!

Seems you could have accomplished the same riding position with a pair of swept drag bars - which I'm guessing would be less $$ outlay.