Author Topic: horns (Read 3119 times)

blackbandit · « **on:** May 05, 2006, 05:37:01 PM »

i have just fitted these stebel magnum horns (twin pack) 139db loud mothers to my b12
my question is should i use the relay some people said they have just plugged straight in and never bothered with relay i realy dont know what to do ,any advice on how to wire up would be most helpful thanks paul........................................................................................

http://www.nippynormans.com/departments.asp?dept=259

...............................................................................................

txbanditrydr · « **Reply #1 on:** May 05, 2006, 08:20:05 PM »

Use the relay... trust me on this one. My Stebel will still dim the headlights slightly and that is hardwired to the battery and with a relay present. Did I mention the thing will absolutely blow you away? For wiring suggestions go to the Bandit FAQ and look for the Stebel horn installation thread.

deepink · « **Reply #2 on:** May 06, 2006, 12:19:49 AM »

I have really got to see this horn, tx! I read your post on installation, but I have to hear this thing in person. Maybe at an ETMG. 139db - Jeez.

PaulVS · « **Reply #3 on:** May 06, 2006, 12:21:51 AM »

139 db?

Seriously.... does the bike stop running when you hit the horn button?

txbanditrydr · « **Reply #4 on:** May 06, 2006, 10:28:18 AM »

The posted DB measurement (according to the fine print) is taken at 4" away from the horn.... not a likely useful distance but even at the standard 10 feet the horn is WAY louder than stock. I'll scrounge around for the Stebel web link... they have wave files of all their horns and the Nautilus is about as obnoxious as you can get - without using straight pipes.

Quote

PaulVS Posted: Fri May 05, 2006 9:21 pm

Seriously.... does the bike stop running when you hit the horn button?

Ummm... that would indicate a bad wiring job

but it really does dim the lights slightly when used - only noticable at night.

blackbandit · « **Reply #5 on:** May 07, 2006, 03:06:56 AM »

so do i plug the posi wire from horn switch into relay
then run a live to relay from battery
then earth relay to frame,
now comming out of relay a live which will power both horns
then earth horns

what size inline fuse should i put coming from battery ????

Red01 · « **Reply #6 on:** May 09, 2006, 11:41:28 AM »

What's the package say they draw? Fuse accordingly.