Author Topic: Swing Arm (Read 3367 times)

Ar-Bandit · « **on:** February 27, 2006, 12:06:42 PM »

I was wondering how many of you guys have stretched your bikes. I am looking for a new swing arm or to get mine worked on but I don't really have any direction to start the process with. Are there any other bikes that there arms will fit the 02 bandit 600. So any help would be a great help.

Matt

Red01 · « **Reply #1 on:** February 27, 2006, 01:33:15 PM »

A B12 arm will bolt in and there are kits to extend them, also several of the swingarm builders have extended B12 arms that will work on a B6.

Since the B6 arm is steel, it should be easy for any competent welding shop to splice and extend your stock arm. This is probably the cheapest route.

Ar-Bandit · « **Reply #2 on:** March 06, 2006, 01:43:11 PM »

ok so the B12 arm is longer then the B6 arm from the factory. How much longer is the 12 then the 6. I think I have found one on ebay...But it ends soon so any help will be greatful FAST.....matt

Red01 · « **Reply #3 on:** March 08, 2006, 02:21:55 PM »

I don't know if it's any longer (I kinda doubt it), it's just there are folks out there that stretch the B12 arms.

Not that it should be difficult to stretch a steel B6 arm...

Ar-Bandit · « **Reply #4 on:** March 08, 2006, 03:31:30 PM »

I did some research and found out that the B12 arm is like .2 or .3 inches shorter then the B6 arm is. But I also found out that the older model GSXR 1100 arms bolt in. So i have purchased a 6 to 8 adjustable stretch for the B6. Thanks for the help man.

Pike