2000 Bandit 1200 Part Out (Almost) - Marietta GA, USA

[magnetnerd]

I'm streetfightering my B12 and need to get rid of a bunch of parts.

I posted this a looong time ago, and never got much of a response.

I will have pictures up of the parts relatively soon (hopefully). However, if you're especially interested in an item that I have, ask and I'll get you a pic within a couple days, tops.

I have plastics, pegs, subframe, airbox, etc. Unless it's from the engine, I probably have it.

I'll get a list of parts going with prices soon. Until then, confirm I have the part and I'll set a price that's OBO.

(disclaimer:...I'm not really sure how clear this post is as I'm dead tired. )

[gamewood]

did you ever get pics up?  interesting in what parts can be transfered to the '03 with efi conversion (throttle bodies etc...)

[Red01]

Frame and bodywork are different on the 2000 (1G) than the 2003 (2G), so items like plastics, airbox and subframe aren't easily interchanged.  The rear footpeg hangers are different, but the pegs themselves will cross.

There are even subtle differences in the engines (different alternator, clutch, cylinder block, carbs), though if you swap at a high enough assembly will interchange.

[slazenger]

I have a 2000 B12 and need the right side (brake side) frame plastic insert above the brake pedal (black flat oblong cover) Thanks