Author Topic: Right footpeg/brake pedal parts stack-up  (Read 18982 times)

Offline JerseyDog

  • Board Regular!
  • **
  • Posts: 14
Right footpeg/brake pedal parts stack-up
« on: April 11, 2019, 08:32:47 AM »
Good morning...
Have to replace the right-side footpeg/brake lever bracket on my 2000 GSF1200S. Can't seem to make it work right - if I tighten the bolt that goes through the bracket/brake pedal into the footpeg too much the pedal won't operate properly. Too loose and the bolt wants to back itself out. The parts diagrams I've found on-line are of no help, they don't provide enough detail. Does anyone know where to find a decent service manual, or perhaps provide a copy of the page in question if you have one?
Thanks...
"Being a biker is not a matter of life or death - it's more important than that."

2000 Bandit 1200s

Offline Ranger

  • Board Homesteader!
  • ***
  • Posts: 206
  • Resident Felon
Re: Right footpeg/brake pedal parts stack-up
« Reply #1 on: May 13, 2021, 12:41:24 AM »
Old topic but what the hell...
Sounds like you're missing this part, #12: Part Number: 43570-46E20
See screen shot
Note to self: Leave no witnesses