valve clearences

[baba]

can some one tell me the clearences for a 96 b12 intake and zorst 

[txbanditrydr]

  to the forum...  Hopefully someone will beat me to it but I have that information at the house and will post it up later today.

[rider123]

Try Here:

http://www.portablepct.com/fastlarry/banditfaq.htm

For my 2005 Bandit its:

(Engine must be dead cold)

Intake valve: 0.10 - 0.15 mm (0.004 - 0006 inches)
Exhaust valve: 0.18 - 0.23 mm (0.007 - 0.009 inches)


Considering it's the exact same engine(air/oil cooled) I'd wager dollars to doughnuts it's the same. If you like you can put the bike in 5th gear and turn the back tire instead of taking the timing cover off to check the valves.

[txbanditrydr]

Considering it's the exact same engine(air/oil cooled) I'd wager dollars to doughnuts it's the same.

I started to say that but knowing I had a Haynes manual I was going to double check.  Now what actually happened is I didn't get home until after a few  and totally forgot....   Maybe tonight...   

[bullet5]

(Engine must be dead cold)

Intake valve: 0.10 - 0.15 mm (0.004 - 0006 inches)
Exhaust valve: 0.18 - 0.23 mm (0.007 - 0.009 inches)

Yep, you're bang on. I just checked my Haynes and it's the same for all early year B6/12's
Bullet5.

[baba]

thanks i will be setting them in the middle