« previous next »
Pages: [1]

Author Topic: chain tighter - noise?  (Read 2352 times)

Offline Snubnose

  • Board Homesteader!
  • ***
  • Posts: 398
  • Cos For why?
chain tighter - noise?
« on: June 27, 2008, 02:32:02 PM »
So I know how a chain can become loose over time( wear etc.), but how would, if possible a chain become tighter by itself? I'm trying to rule out chain being too tight as a cause for "stammering" or "jerkiness" as I decel or coast a little and possible the reason I have a "drone" or "howl" noise that increases in pitch as I accelerate.
Logged
SNUBNOSE, Alberta, Canada
2003 B12S - Silver
Stock 06' pipe
3 shims on each needle
Zero gravity SR
Sw Motech rear rack - V46 Top case
PAIR Block off Kit
Salamander Bar Ends
007 special license plate feature ;)

We are not what we think we are, We are not what others think, but rather, we are what we think others think we are!

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: chain tighter - noise?
« Reply #1 on: June 27, 2008, 03:20:17 PM »
The only way I can think of is if you've got links that are binding.

Unless you've been freezing the bejeezus out of your chain.  :trustme:
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: chain tighter - noise?
« Reply #2 on: June 27, 2008, 03:31:21 PM »
A fellow Bandit owner swears his chain got tighter during a multi-day ride once....  his theory - possibly caused by hitting cattle guards on some of the Hill Country roads in Texas.  I'd check your axle nut tightness and may sure everything is up against the adjustment plates.  You can always loosen the chain too....  :stickpoke:
Logged
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline Blade

  • Board Homesteader!
  • ***
  • Posts: 332
    • http://www.billsbikesnservice.com
Re: chain tighter - noise?
« Reply #3 on: June 30, 2008, 12:34:49 AM »
The only way I can think of is that the chain is adjusted at the loosest part of the chain instead of the tightest part. Then when it comes around to the tightest part of the chain it is to tight.
Logged
Pages: [1]
« previous next »