« previous next »
Pages: [1]

Author Topic: Turned over without plugs in heard a pop  (Read 3279 times)

Offline notagix

  • TURBO TYPER!
  • **
  • Posts: 38
Turned over without plugs in heard a pop
« on: November 16, 2011, 01:24:11 PM »
While winterizing my 07 B1250 I put some oil in the cylinders then turned it over without the spark plugs in and heard a pop. Can you damage the electronics this way?
Logged

Offline banditv

  • Board Homesteader!
  • ***
  • Posts: 66
Re: Turned over without plugs in heard a pop
« Reply #1 on: November 17, 2011, 03:49:10 AM »
you shouldnt hurt any thing.
an old trick is to pull the plugs, put a few squirts of diesil in each hole and give it a few turns on the starter. stops the rings and bores from rusting and its not going to hurt anything at all
Logged

Offline notagix

  • TURBO TYPER!
  • **
  • Posts: 38
Re: Turned over without plugs in heard a pop
« Reply #2 on: November 17, 2011, 11:35:55 AM »
Thanks for the reply, heard a pop, don't know what that was.
Logged

Offline canyonbreeze

  • Board Homesteader!
  • ***
  • Posts: 240
Re: Turned over without plugs in heard a pop
« Reply #3 on: November 17, 2011, 12:04:00 PM »
Maybe an electrical pop of the spark intended for the plug finding a ground elsewhere? 
Logged

Offline rider123

  • Board Homesteader!
  • ***
  • Posts: 991
Re: Turned over without plugs in heard a pop
« Reply #4 on: November 17, 2011, 08:45:58 PM »
Maybe the "pop" was more of a fast whoosh as when the pistons are coming up they are creating pressure that blows out the spark plug hole creating noise. Think of it as blowing on a pop bottle x20. Or a subsonic report out of a firearm.
Logged
2005 Bandit 1200, Modified Holeshot Stage 1 with 17.5 pilots 2.75 turns out, and 110 mains 5 shims. Muzzy Slip on w/mid-pipe, stock filter. 1.5" hole in the airbox lid.
Pages: [1]
« previous next »