Author Topic: Repacking exhaust (Read 3363 times)

chevsuz12 · « **on:** September 12, 2005, 12:16:11 AM »

I need to repack my D&D bolt on. Does anyone have any suggestions as far as what type of packing to use? I hear ceramic is the best. But where can this be purchased at?

PeteSC · « **Reply #1 on:** September 12, 2005, 12:23:46 AM »

Does D and D sell a repack kit? I know a few manufacturers do......with the insulation....new rivets, etc.

chevsuz12 · « **Reply #2 on:** September 12, 2005, 09:53:47 AM »

No they don't. I even asked them what type they recommend and where to purchase it. There response was "you can get it anywhere". I have yet to find any.

tomacGTi · « **Reply #3 on:** September 12, 2005, 10:39:14 AM »

I would recommend a speed shop as Supertrapp offers repack kits for their muffflers.

Generally, the repacking material is rock wool due to it's tolerance for heat and just outright cost. Also, the more/less you use will affect how it sounds. You could also go through JC Whitney as I know they offer repackable exhausts as well.

-Randy

PeteSC · « **Reply #4 on:** September 12, 2005, 01:26:34 PM »

Two brothers has one, for sure....with a roll of packing material, rivets, and a drill bit to drill out the old rivets. It's like $20
One of the big motorcycle magazines had a 'how to' article about a year ago on repacking your slip on. Can't remember which one.....

http://www.twobros.com/Cust_Service/Install_Inst/TBR_Repack_Kit_Instructions.pdf

PitterB4 · « **Reply #5 on:** September 12, 2005, 01:29:57 PM »

I can't find one at the moment but D&D does make one. I remember looking at them when I had my D&D. IIRC it was ~$30 for rivets and the packing.

PeteSC · « **Reply #6 on:** September 12, 2005, 01:31:05 PM »

Bingo!

http://motorcyclistonline.com/howto/122_0309_howto/

tacoman · « **Reply #7 on:** September 12, 2005, 01:47:32 PM »

Most bike shops sell repacking material. I've used packing from a company called Silent Sport. Works well and not too expensive.

chevsuz12 · « **Reply #8 on:** September 13, 2005, 12:44:01 AM »

Thanks for the info guys.