Author Topic: 400 and 600 top yokes the same??? (Read 7436 times)

2toneblonde · « **on:** January 18, 2006, 04:13:41 PM »

Hi All!

This may sound a silly question to all you bikers... but is the top yoke the same on a 400 as the 600 Bandit?? Have got clip ons on my 400 and want renthals.. it seems that here in the uk its easier to get parts for the 600.. please help.. Im new to all this! Thanx in advance!

PitterB4 · « **Reply #1 on:** January 18, 2006, 04:44:35 PM »

I SERIOUSLY doubt it. The tubes are the same diameter (41mm) but I'll bet the spacing is different.

However, I'll bet that you could find a 400 owner that has the tubular bar type top yoke that wants to convert to clips.

2toneblonde · « **Reply #2 on:** January 18, 2006, 04:50:41 PM »

Thanks for the speedy reply... Well if anyone out there wants to do a swap

.. gimme a shout! .. please.. im desperate.. i need to be sat up more.. too old for this down on the tank lark! hahaha

PitterB4 · « **Reply #3 on:** January 19, 2006, 02:31:32 PM »

If you were here in the US, I'd consider it. Try posting the question over in the 400 forum.

Red01 · « **Reply #4 on:** January 19, 2006, 09:00:12 PM »

Quote from: "PitterB4"

If you were here in the US, I'd consider it. Try posting the question over in the 400 forum.

You could have just moved it for him...

PitterB4 · « **Reply #5 on:** January 19, 2006, 09:49:58 PM »

Quote from: "Red01"

Quote from: "PitterB4"
If you were here in the US, I'd consider it. Try posting the question over in the 400 forum.

You could have just moved it for him...

I'm aware of that. I thought the premise of the original question might be mildly interesting to one or two of the "regular" members.

DogBoy · « **Reply #6 on:** January 19, 2006, 09:58:39 PM »

I've got two B4 upper triples with risers for handle bars.

I may be looking to swap to clip-ons when I get my GSXR400 forks (any day now). I'm not sure the adjusters on the GSXR forks will fit under the bars so I might be looking to switch to clipons.

The previous owner of my bike told me first gen SV650 upper triples fit the Bandit 400. Anyone know if this is true?

PitterB4 · « **Reply #7 on:** January 19, 2006, 09:59:16 PM »

(and yes, I realize that I could have left a "shadow" over in the Tech forum)

2toneblonde · « **Reply #8 on:** January 20, 2006, 05:14:55 AM »

....Could have moved it for HIM...

Im a HER!!! lol

The posting bit to the USA worries me a bit.. expenses etc.. i was hoping for someone in the UK, but when and if u decide u want these clip ons, please let me know.. Cheers guys!

Racerruss-ducati · « **Reply #9 on:** January 20, 2006, 08:53:11 AM »

I did the opposite and purchased an flat upper tree from a guy in the UK. The shipping was £15.00 GBP (~US$28) and takes about 10 days.

I have the old upper and caps, if you don't find one in the UK, let me know and we can work out a deal. I also have the stock bars (slightly damaged) and a new set of flat "drag" bars. The drag bars (no, they are not wearhing fishnets and high heels) were a nice split between clip ons and the stockers. I thought the stockers were too far back and they were way uncomfortable for me.

BTW, the clip ons you have will not work on DogBoy's conversion because of the USD forks diameter.

PitterB4 · « **Reply #10 on:** January 20, 2006, 09:33:18 AM »

The GSXR 400 forks aren't USD - they're just adjustable and have bosses for 2 calipers.

2toneblonde · « **Reply #11 on:** January 20, 2006, 12:02:04 PM »

That sounds just the ticket... but i may just sell the bike as my other half is lookin to get a B12 so hopefully i can have his B6

but of course, if this doesnt happen, i will be in contact with you!

DogBoy · « **Reply #12 on:** January 20, 2006, 12:57:59 PM »

As soon as my forks arrive in the mail, I'll check the fit and post the results.

Racerruss-ducati · « **Reply #13 on:** January 20, 2006, 02:38:18 PM »

My bad, I thought DogBoy was doing the GSXR USD conversion.

Are the GSXR 400 forks any better than what we have or do you just get the dual disk setup???

PitterB4 · « **Reply #14 on:** January 20, 2006, 03:52:02 PM »

Quote from: "Racerruss-ducati"

Are the GSXR 400 forks any better than what we have or do you just get the dual disk setup???

The only otherthing I'm aware of is preload adjustments. Beyond that, I'm not sure.