Aftermarket exhaust (rejet carbs?)

[Squishy]

Hi all.

My name is Walter and I registered here with the following question   
I ordered a roadsitalia carbon ovale for my 92' bandit 400.
When running without DB-killer, will I need to rejet my carbs? ..or will adjusting the throttle needle clips be enough? (1 clip 'richer'?)

Thanks,

Walter

[TJS]

Stock headers?
If you have clips on your needle then you must have a jet kit. If not; you can put a washer under your stock needle.
You will also want a K&N filter for your airbox.

[Squishy]

Stock headers?
If you have clips on your needle then you must have a jet kit. If not; you can put a washer under your stock needle.
You will also want a K&N filter for your airbox.

what? the b400 has clips by default... RIGHT?

[canyonbreeze]

Wrong, not on the needles.  The little e clips and needles that accept them come with jet kits.  Stock Mikunis don't have any adjustment there.

[interfuse]

It depends on your location. The US model bikes don't have clips on the needles and smaller carbs to meet  stricter emissions standards. The Canadian (and i believe EURO) bikes come with adjustable needles and slightly bigger carbs.

[Squishy]

It depends on your location. The US model bikes don't have clips on the needles and smaller carbs to meet  stricter emissions standards. The Canadian (and i believe EURO) bikes come with adjustable needles and slightly bigger carbs.

That's what I thought.. I have the 33mm carbs. And I doubt the previous owner installed a kit