Author Topic: Aftermarket Slip-on exhaust with stock header? (Read 5104 times)

TheKillerB · « **on:** October 05, 2005, 02:18:33 PM »

Has anyone cut the can from their stock exaust and put an aftermarket slip-on onto it? If so, what brand exhaust did you use and what bike was it intended for?

PitterB4 · « **Reply #1 on:** October 05, 2005, 02:29:04 PM »

I have stock headers, a custom-bent midpipe and an M4 TI can. Had a D&D on the same setup before. I'm not sure what bike they were intended for but anything with the right siz opening (2 inch, right?) and a pinch-type clamp would work. What's wrong with the Yoshi?

Maniac · « **Reply #2 on:** October 05, 2005, 02:36:53 PM »

I had a Supertrapp on mine, which I loved. Yeah, whats wrong with the Yosh?

TheKillerB · « **Reply #3 on:** October 05, 2005, 03:45:29 PM »

The yosh pipes have rusting issue. I had them Jet Hot coated a few years ago but they are rusting from under the coating and showing through. I got ahold of a Euro stainless steel stock pipe and am researching my options.

PitterB4 · « **Reply #4 on:** October 05, 2005, 04:10:04 PM »

I bought my M4 from Winslo. Haven't seen him on here in a while. Maybe try PMing him what it is. IIRC, he works at a bike shop. It's really nice.

Thief400 · « **Reply #5 on:** October 05, 2005, 04:12:30 PM »

did you contact jet hot and see what they say about the rusting, sounds like a prep problem or a coating failure

TheKillerB · « **Reply #6 on:** October 05, 2005, 05:50:01 PM »

It's been a while, but their warranty for brand new pipes and used pipes is different. I think used pipes only have a 1 year or something. My pipes were past the warranty date.

KSUGreggy · « **Reply #7 on:** October 05, 2005, 08:22:22 PM »

ive got a D&D slip on with teh stock pipes....PO cut off the stock and put the D&D so thats all i can really say about it....is there anything wrong with the yosh pipe...if you want a D&D maybe we can work out a trade as i might be looking for something not quite as loud

gsxr400 racer · « **Reply #8 on:** October 06, 2005, 04:35:28 AM »

B , You need to get a hold of the dude that was selling the Beet nasert R Ti pipe that would top off yur beautiful bike bro!

TheKillerB · « **Reply #9 on:** October 06, 2005, 05:43:58 PM »

Quote from: "gsxr400 racer"

B , You need to get a hold of the dude that was selling the Beet nasert R Ti pipe that would top off yur beautiful bike bro!

I think those were a little expensive for my blood, but that definitely would be sweet.

Racerruss-ducati · « **Reply #10 on:** October 06, 2005, 09:45:25 PM »

I have a Muzzy Carbon Fiber can on my B4. Suzuki made the header pipe 50.8mm (2 inches), which is what most aftermarket cans are. Mine was intended for a '99 ZX-9 Kawi. Sounds great, not too loud, not too quiet, just right. See the pics at http://www.bikepics.com/members/racerruss/93bandit400/. Be sure and get the clamp if you buy one, it will be tough to make one that will look good.

JmuRiz · « **Reply #11 on:** October 07, 2005, 12:05:59 PM »

Wow, that's a great looking Muzzy...where'd you get it (new I'm guessing) and how much was it? That'd look great on my FZR400 (all black).

Racerruss-ducati · « **Reply #12 on:** October 07, 2005, 05:53:36 PM »

Quote from: "JmuRiz"

Wow, that's a great looking Muzzy...where'd you get it (new I'm guessing) and how much was it? That'd look great on my FZR400 (all black).

It came from Star Cycle. I called them up, told the guy what I was doing and asked if they had a new slip on with a 2" straight inlet and a bracket. He checked and said he did and let me have it new for $175 + shipping. It looks like they sell slip-ons through and Ebay store as well, but nothing is listed that cheap right now. Their website is at http://www.starcycle.com/exhausts.html.

Good luck.