Stainless Steel Bolt Kit for B4

[1993gsf400]

Hi everyone,

I found and bought a set of stainless steel bolts for the B4. They are the bolts for the side covers and look really nice compared to the stock ones. Here is the link if anyone is interested:

http://cgi.ebay.co.uk/Suzuki-Bandit-GSF400-Stainless-Engine-Bolt-Kit_W0QQitemZ350030062815QQcmdZViewItem?_trksid=p3286.m20.l1116

It took roughly a week and a half to get them in.

Tony

[bandit250]

Yeah, I've seen them before on Ebay.

I have a 250 Bandit, so I emailed him to see if he could make me a kit. He said he could but needs the length from below the head to the tip for all the bolts. Anybody have the measurements by any chance?

[PitterB4]

Yeah, I've seen them before on Ebay.

I have a 250 Bandit, so I emailed him to see if he could make me a kit. He said he could but needs the length from below the head to the tip for all the bolts. Anybody have the measurements by any chance?

Wouldn't take you more than 15 minutes or so to pull and measure them...

[1993gsf400]

Yeah, I've seen them before on Ebay.

I have a 250 Bandit, so I emailed him to see if he could make me a kit. He said he could but needs the length from below the head to the tip for all the bolts. Anybody have the measurements by any chance?

Wouldn't take you more than 15 minutes or so to pull and measure them...

That is probably the easiest way to find out; however, I did encounter a website once where I ordered parts for the 400 and some of the bolts had the measurements listed next to the part number. I need to order some OEM bolts (almost lost my entire headlight to lose bolts!!) so if I run into the website I'll let you know.

[bandit250]

Sorry, I was being lazy but will get around to it soon when I get time. I'm either working or sleeping at the moment! If I get it done anytime soon, I'll post the info and seller again.

That website would be good if you can find it 1993gsf400, thanks.

[1993gsf400]

Bandit250 - the website does not have parts for a 250  sorry man.