Author Topic: GSF 400P v GSF 400N...Whats the difference? (Read 5278 times)

mgTagGD · « **Reply #15 on:** August 27, 2006, 12:34:44 PM »

According to original suzuki manual

N model (92) :
IN 0.10-0.15mm(0.004-0.006in)
EX 0.15-0.20mm(0.006-0.008)

P model (93) :
IN 0.13-0.18mm(0.005-0.007in)
EX 0.20-0.25mm(0.008.0.010in)

And now that i reviewed the numbers i remembered that last time i adjusted the valves althought i have the P( the only reason i know is a P was a sticker under the seat when i bought it, now the sticker is gone! i think it had a label P) i adjusted with the N numbers

Well IN is almost the same but EX differs a lot.
I hope this will not give me any trouble , engine runs fine and it rocks!
I am willing to adjust again soon.

gsxr400 racer · « **Reply #16 on:** August 27, 2006, 12:39:28 PM »

cool thanks wonder what the p model cams look like that they need that much more clearance.

mgTagGD · « **Reply #17 on:** August 27, 2006, 01:32:27 PM »

i dont have any specs on this , but you can take a look here!
http://goozlo.com/images/suzuki_GSF400P.zip

P model realy kicks at 6.000 rpm once , and the again at 8.000rpm

land-warrior.rus · « **Reply #18 on:** August 28, 2006, 03:24:28 PM »

is there any other way to find out wich one is my bike as im thinking about adjusting the valves and dont really fancy doing the wrong clearance.
Cheers

mgTagGD · « **Reply #19 on:** September 01, 2006, 12:14:16 PM »

look at this site , i dont know any Japanise , but i think that from the range of the VIN you can identify the year

http://www.bands.ne.jp/faq/faq-yr-400.html this the most clear about the year.
http://www2r.biglobe.ne.jp/~igu/ff400.html
http://www.tzhd.net/bbs/TopicOther.asp?t=5&BoardID=128&id=16902
http://www.geocities.jp/kohjihata/bike/others/bikemodel.html
http://www1.odn.ne.jp/~cde33290/TEAMBANDS/Technical-Information/setting-1.htm

land-warrior.rus · « **Reply #20 on:** September 01, 2006, 06:17:52 PM »

Cheers Panakos. Thats cool. Will start looking through now.
Thanks again!!!