Author Topic: limiter removal. (Read 3592 times)

banditmack · « **on:** May 01, 2005, 03:49:40 PM »

My bike a 96 b4 does not go past 100mph. I understand there may be a limiter involved. Please can you tell me if it's locatd in the speedo and how to remove it fo

r full performance.

Maniac · « **Reply #1 on:** May 01, 2005, 04:03:06 PM »

It's located in the Digital Igniter box, unfortunatly. The only way to get it out is to have the box modified, do a search in the forum for 'CDI Repair', the place listed there is able to remove it, but it's not cheap.

gsxr400 racer · « **Reply #2 on:** May 02, 2005, 10:23:30 PM »

got a green and yellow wire coming out of yuor cdi box? on the small plug? if so follow it and unplug it. see what happens

Maniac · « **Reply #3 on:** May 02, 2005, 11:40:32 PM »

I've got the Green and Yellow wire, it runs down towards the pickup... but doesn't plug into anything. Whats it do?

gsxr400 racer · « **Reply #4 on:** May 02, 2005, 11:45:53 PM »

i have one on my harness goes to the cdi i cut mine and it seems to run better from what i was told it goes to a speed limiter. after i cut mine i found a bullet connector that i could have just unpluged if you have this chances are you are restricted should have 2 wires to small plug on cdi i have 3 but cut one ive talked to others with 3 didnt hurt to cut it i raced like that just last time. with no ill effects. if ya dont like it reconect it.