« previous next »
Pages: [1]

Author Topic: rear disc  (Read 3134 times)

Offline b4cruz

  • Board Homesteader!
  • ***
  • Posts: 273
rear disc
« on: July 02, 2005, 12:57:18 PM »
anyone know where to get a
replacement rear disc
for a better price?

DISK,REAR BRAKE
518028-001
$179.4

the manual says its serviceable
but nobody wants to touch it around here
5.5mm .22inches = thickness
.3mm ,012inches = runout (i think my disc fails here)
Logged

Offline Racerruss-ducati

  • Board Homesteader!
  • ***
  • Posts: 112
rear disc
« Reply #1 on: July 02, 2005, 02:46:24 PM »
Chaparral lists in there paper catalog an EBC stock replacement rear brake disk PN 361-2879 for US$130.99.  They also list an EBC Pro-Lite rotor PN 361-2527 that is contoured on the outside (looks cool) for US$125.99.

I could not get it to show online, but you should be able to call 1-800-841-2960 with the above part numbers to find out more.  See the pics at http://www.ebcbrakes.com/motorcycle.html.
Logged
'96 Ducati 900 SP street
'04 Yamaha R6 track

Offline b4cruz

  • Board Homesteader!
  • ***
  • Posts: 273
rear disc
« Reply #2 on: July 02, 2005, 04:01:57 PM »
thanks!

MD3002C


MD3002


OEM on the microfische is 69211-01000
the same rear disc is on the
89-05 GS500
88-97 GSX600

there is also "braking" brand for $101.96
http://www.cyclepages.com/ProductGroupDisp.aspx?ProductGroupID=4000451
Logged

Offline banditcilik

  • Board Homesteader!
  • ***
  • Posts: 76
rear disc
« Reply #3 on: July 07, 2005, 01:36:56 AM »
Isn't it cheaper to go to machine shop and have it grinded?
Logged

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
rear disc
« Reply #4 on: July 07, 2005, 01:46:58 AM »
Quote from: "banditcilik"
Isn't it cheaper to go to machine shop and have it grinded?


I don't think there's enough material on a motorcycle rotor to have them machined. If I'm not mistaken a new rotor is only 5mm thick and must be replaced when it wears to 4mm.
Logged
Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
rear disc
« Reply #5 on: July 07, 2005, 02:13:25 AM »
Quote from: "banditcilik"
Isn't it cheaper to go to machine shop and have it grinded?


I guess you missed this part?

Quote from: "b4cruz"
the manual says its serviceable
but nobody wants to touch it around here


Probably because most shops that can resurface the rotor don't have the tooling to cuck it up in their machines.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline b4cruz

  • Board Homesteader!
  • ***
  • Posts: 273
rear disc
« Reply #6 on: September 04, 2005, 05:00:02 PM »
its better to ditch the stock one anyway
the stock one is way too heavy
all of the aftermarket discs I found are lighter

i went with the braking brand from cyclepages
and its working great!

just becareful when you remove the rotors
keep that hex in straight - dont strip the bolt heads
just use lots of penetrating solution and heat
Logged
Pages: [1]
« previous next »