06 B12 Dyno Baseline

[JamieK]

I am about to install a Muzzy full exhaust with the HoleShot stage 1 jet kit and timing advancer so I decided to do a baseline dyno run to see what gains I will be getting. This was the first dyno run for me so it was fairly exciting. It was done at a Harley shop but the guys were very interested in the ol' B12...and they were a bit surprised by the results. The bike has a whopping 260kms on it so I expect the engine to free up a bit when I can get riding again in the spring. I am quite happy with the baseline results with 100.27HP and 73.09ft/lbs of torque. In a couple weeks I will do another run and post those results as well.

Gratuitous bragging rights pic  

[Red01]

They'll probably be even more interested when they see the big jump in the numbers after the pipe & jet kit!  

[JamieK]

I should be taking it back there the first weekend in Feb

Removed the stock exhaust and installed the Muzzy last night. Took off almost 18lbs! The new exhaust is fairly loud but does have a nice burble at idle. Of course I 'had' to fire it up with the open header which was expectedly loud, but, once installed I was surprised how little the muffler muffled This weekend I'll be installing the jet kit and timing advancer.