Author Topic: This is going to cost me a clutch basket, huh? (Read 4226 times)

StangMATA · « **on:** February 17, 2007, 12:37:27 AM »

3 teeth missing on the inner gear.

http://www.supermotors.net/getfile/485874/fullsize/img_5737.jpg

http://www.supermotors.net/getfile/485175/fullsize/clutch.jpg

Figure I need the entire basket...unless someone has another idea.

reaper · « **Reply #1 on:** February 17, 2007, 08:23:12 AM »

no mate you just need the gear on the back it splits from the basket

StangMATA · « **Reply #2 on:** February 17, 2007, 10:23:59 AM »

Reaper, could you show me which gear it is on the fische then?

It looks to me that the smaller gear is part of #1. I can't find a seperate part number for it.

http://www.supermotors.net/getfile/485175/fullsize/clutch.jpg

reaper · « **Reply #3 on:** February 17, 2007, 02:30:19 PM »

lol i cant see it on that pic ? but it does split from the basket i will to to get you the part number

StangMATA · « **Reply #4 on:** February 17, 2007, 02:47:48 PM »

Apparently it is part of the gen drive gear. Two gears in one with the price to prove it.

reaper · « **Reply #5 on:** February 17, 2007, 03:00:36 PM »

that must be it then ask on maximum suzuki one of the lads on there may have one you never no worth a try

Bob Holland · « **Reply #6 on:** February 19, 2007, 10:13:14 AM »

You need to check the mating gear on the oil pump, it could be damaged, also, you need to find those teeth. Try a magnet, but if all else fails, pull the oil pan.
I have 2 or 3 of those gears from GSXR 1100s, I can send you one, and the gear for the oil pump, PM me you address if your want them.

reaper · « **Reply #7 on:** February 19, 2007, 02:28:01 PM »

hey BHolland thats very good of ya mate nice one

StangMATA so your sorted now

jwalters · « **Reply #8 on:** March 30, 2007, 04:20:20 PM »

Bholland,
i have the same problem as stangMata, any chance you still have an extra set of gears laying around? I also need the mating gear going to the oil pump. Any help would be appriciated!

Ashamed to admit it, but I must not have had the basket it properly before torquign down the clutch nut.

Thanks!

Bob Holland · « **Reply #9 on:** March 30, 2007, 04:29:25 PM »

I will dig out a set tomorrow, pm me your shipping address.

Bob Holland · « **Reply #10 on:** April 01, 2007, 05:48:32 PM »

I have one for a 1989 GSXR 1100, according to Suzuki, the part numbers are different between the Bandit and GSXR.
Your welcome to it, if it will work.

Blade · « **Reply #11 on:** May 27, 2007, 08:55:25 PM »

Quote from: "StangMATA"

Reaper, could you show me which gear it is on the fische then?

It looks to me that the smaller gear is part of #1. I can't find a seperate part number for it.

http://www.supermotors.net/getfile/485175/fullsize/clutch.jpg

It is number 37. I also have access to OEM parts.